Purchase Solution

Stress/strain

Not what you're looking for?

Ask Custom Question

I'm a new student to engineering and having some trouble with the question below.

how is the force in this problem moved through the system?

Direct shear stress = g = applied force/shear area

Attachments
Purchase this Solution
Solution Summary

The solution provided with a detailed diagram. The force in the problem moved through the systems are determined.

Solution Preview

Please refer to the attachment.

Solution:

F

Tubular shaft 1
Under compressive
Stress(tube)
Pin
Under shearing ...

Purchase this Solution
Free BrainMass Quizzes
Theories of Work Motivation

This quiz tests the student's understanding of the major theories of work motivation from an organizational behavior perspective.

Erik Erikson's Psychosocial Stages

Erik Erikson researched eight stages of psychosocial development beginning at birth and ending at death. This quiz challenges your knowledge of each stage, the corresponding age range, and the conflicts present during each stage.

Common Characteristics of Qualitative Methods

This quiz evaluates the common characteristics seen in qualitative methodology.

Psychology

This quiz provides a general overview of psychology basics.

Sigmund Freud

How much do you know about Sigmund Freud's theories? Find out with this quiz!

View More Free Quizzes
Related BrainMass Solutions

  • 5678 Elastic Deformation: Working with strain and stress using a spider and its thread. Elastic Deformation: Working with strain and stress using a spider and its thread.

  • Mechanics : Ten Problems

    Modulus of rigidity = Tangential stress/Shearing strain Shearing strain = Tangential stress/ Modulus of rigidity Tangential stress = 3500/(0.1x0.25) = 14 x 10^4 N/m2 Shearing strain = 14x10^4/5.4x10^9 = 2.6x10^-5 By definition, shearing

  • Modulus of elasticity from stress-strain graph

    The stress-strain relationship is the usual where the relationship is proportional when strain is low. As strain is increased this linearity is lost. The modulus of elasticity is estimated by plotting a stress-strain graph.

  • Analysis of the mechanical properties of different materials

    As can be seen from the curve it is the maximum point reached in the Stress-Strain curve.

  • Elasticity

    Young's modulus= Stress /Strain= 1,273,237 N/m^2 (or Pascal Pa) This can also be written as 1.27 Mpa Calculates the stress, the strain and the Young's modulus.

  • Working with stress, strain and Hooke's Law.

    These are both given, so the strain is 8x10^-3 / 15 = 5.33 x 10^-4 c) Young's modulus is the ratio of the stress over the strain.

  • Stress, Strain, and Hooke's Law

    = 10.5x10^-3 / 14 = 0.00075 (c) Young's Modulus = stress / strain = 5.29x10^11 The solution calculates the stress and strain on a car lifted by a crane.

  • C++ Program: Output Stress and Strain at Given Loads

    A function to compute the stress from the formulas Stress f = P/A (p divided by a) Where A = πD^2 /4.0 A function to compute the strain from the formulas Elongated pr shortened length L= FL/E Strain e= L/L = f/E A function to output the stress

  • Stress and Strain Calculations

    Determine: (a) The stress in Part A (b) The stress in Part B (c) The strain in Part A (d) The strain in Part B (e) The total extension of the shaft. (See attached file for diagram). Please see the attached file.

  • Mechanics of Materials: Strain Hardening

    81635 Mechanics of materials: strain hardening Explain strain hardening, on a microstructural level.

View More Related Solutions