Purchase Solution

How much current will flow through the diode?

Not what you're looking for?

Ask Custom Question

A 5.1 K resistor is connected between the cathode of a 6.2 V zener diode and a 12 V power supply. The anode of the diode is connected to 6 V. Approximately how much current will flow through the diode?

Attachments
Purchase this Solution
Solution Summary

Forward voltage is negative hence the diode is in reverse bias.

Solution Preview

The diode can work on 6.2 V, while the anode is connected to 6V, and cathode is ...

Solution provided by:
Amrit Lal Ahuja, PhD (IP)
Education
  • BEng, Allahabad University, India
  • MSc , Pune University, India
  • PhD (IP), Pune University, India
Recent Feedback
  • " In question 2, you incorrectly add in the $3.00 dividend that was just paid to determine the value of the stock price using the dividend discount model. In question 4 response, it should have also been recognized that dividend discount models are not useful if any of the parameters used in the model are inaccurate. "
  • "feedback: fail to recognize the operating cash flow will not begin until the end of year 3."
  • "Answer was correct"
  • "Great thanks"
  • "Perfect solution..thank you"
Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Circuit analysis and current

    42227 Circuit analysis and current A 5.1K resistor is connected between the cathode of a 6.2V zener diode and a 12V power supply. The anode of the diode is connected to 6V. Approximately how much current will flow through the diode?

  • Semiconductors

    The base serves as the controlling gate of the transistor and the thinnest layer of transistor, controlling how much of the charges from the emitter are to pass through the collector.

  • Average current and average voltage

    Similarlly for the next half cycle through the other two diodes, the same thing will happen. Hence, the fraction of the cycle for which the current will flow through each diode is outlined here: f = (pi - 0.0825896*2)/(2*pi) = 0.486855.

  • Graph source and load voltage of a circuit

    When , the current flow into diode from its left-hand side. Diode permits current flow. In other words, the diode acts like a short circuit. Thus, the load voltage is . However, when , the current flow into diode from its right-hand side.

  • Comment on Frankenstein power supply

    The current supplied to the load will pass (for the most part) through the transistor. This allows the regulator to supply current to a much tougher (lower resistance) load. This solution is provided in 457 words.

  • Determining Current and Voltage for a Network

    As source current, Is = 10 mA, this will be distributed into two branches of 2.2 k-Ohm and 1.2 k-Ohm resistors. Hence, current through the diode will be of the order of a mA.

  • Zener Diode

    282234 Calculate current through a zener diode. Calculate the value of the current through a zener diode if the power supply is rated at 24 volts @ 500 milliamperes, the load voltage is 12 volts and draws a current of 300 milliamperes.

  • Diodes, transistors (including BJT) and current mirrors

    The series resistor presents the additional voltage drop with respect to diode current, wherein as the current through the diode increases at the conducting region, the total voltage across the diode also increases, as shown in the inclined section I-V

  • Diode Models

    ) A diode operation at T = 300K has 0.4 V across it when the current through it is 10mA, and 0.42V when the current is twice as large.

View More Related Solutions