Purchase Solution

Hydraulic machine

Not what you're looking for?

Ask Custom Question

In the hydraulic system shown in Figure 15-28 the piston on the left has a diameter of 4.9 cm and a mass of 1.7 kg. The piston on the right has a diameter of 12 cm and a mass of 2.9 kg. If the density of the fluid is 750 kg/m3, what is the height difference h between the two pistons?
____ m

Figure 15-28

SEE ATTACHMENT

Attachments
Purchase this Solution
Solution Summary

The solution shows, step by step, how to derive the equation for the height of the piston.

Solution Preview

The solution is attached below in two files. the files are identical ...

Purchase this Solution
Free BrainMass Quizzes
Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

The Moon

Test your knowledge of moon phases and movement.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Basic Physics

This quiz will test your knowledge about basic Physics.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

View More Free Quizzes
Related BrainMass Solutions

  • Report on Machinery / Equipment Hazards

    At operating temperature the hydraulic tank may be hot and under pressure Consequences: If ignition sources are present the hot hydraulic fluid presents a high fire hazard.

  • Preventing Employee Negligence in the Work Place

    For example, check the lubricating oil levels, check the hydraulic pressure, clean all metal debris from the processing area, etc.

  • Darcy's Law to Estimate

    q = darcy's flow, n= porosity, -K = hydraulic conductivity, i = change in hydraulic head over length/hydraulic gradient V = 10^-8(0.6)/0.15 V = 4x10^-8 Just for the record, you use the new calculated hydraulic gradient that was calculated in the

  • Designing a hydraulic system

    393514 Designing a hydraulic system See attached figure. Hydraulic Piston. The basic design of any hydraulic system is two connected fluid-filled cylinders of different cross-sectional area.

  • Hydraulic Cylinders

    This movable cylinder is usually connected to the part of the machine that you want to move. The benefit of hydraulics is that you are able to supply large amounts of force through movable pipes and hoses using an incompressible liquid.

  • Hydraulic Circuit Diagram

    This solution provides in 517 words a detailed diagram of a hydraulic circuit, including descriptions for the function of the pump, hydraulic valves, hydraulic cylinders, control valve, reservoir and hosts/connections.

  • Hydraulic Conductivity

    Calculate the hydraulic conductivity of the rock sample. _________________________________________________ (1) Q=KiA Q= flow rate, K= hydraulic conductivity, i= hydraulic gradient = change in hydraulic head/change in distance, A = cross sectional

  • Head-box issues in Pulp Mill : Theoretical Modelling Question

    Air-cushion headboxes are now used mainly for moderate machine speeds, for the manufacture of different specialty papers, and for some kraft paper machines, which require very large jet thickness. 6.2.3 Hydraulic headboxes Hydraulic headboxes were designed

  • A trickling filter question

    loading Total flow = 500 gpm + (500 gpm x 0.4) = 700 gpm Surface area = 3.14 x (54 ft x 54 ft)/4 = 2290 ft2 = 213 m2 Hydraulic loading rate = 700 / 213 = 3.29 gpm/m2 The BOD loading rate and hydraulic loading rate are calculated for a trickling

View More Related Solutions