Wooden beam under constant load at an angle

Related BrainMass Solutions

• Simple Beam Concentrated Load at a Point

  18738 Simple Beam Concentrated Load at a Point Draw the shear and bending moment diagram for the beam shown and find the value of the maximum bending stress. This case is a Simple Beam Concentrated Load at a Point.

• Beam Deflection Solution

  366361 Beam deflection Q.1 Derive an expression for the deflection due to shear for a cantilever beam of constant rectangular cross section, under action of a point load, P at free end.

• Determining Stress at Point A

  304820 Determining Stress at Point A The L-shaped cross section beam seen below supports a distributed load w. The load line of the distributed load is at a 70 angle with the horizontal axis and does not cause any torsion in the beam.

• Mechanical Engineering Problem Sets

  If the allowable unit stresses are 15,000 psi in shear and 48,500 psi in bearing,how many rivets are needed to transmit a total load of 52,000 lb? 7) A simple beam supports a concentrated load at midspan.

• Thin walled box beam with end load at an angle.

  3620 Thin walled box beam with end load at an angle. A box beam made from an extruded aluminium ally having 5 414 mm wall thickness is loaded by an inclined force P=100 N, as shown in the figure. Determine the maximum stress on section a-b.

• Reaction Forces Vertical Guides

  39741 Reaction Forces Vertical Guides A horizontal beam under load can roll along a vertical guide as shown. What are the reaction loads at A? Shear? Axial? See attached A horizontal beam under load can roll along a vertical guide as shown.

• Deflection and slope of cantilever beam

  114676 Deflection and Slope of Cantilever Beam For the cantilever beam and loading shown, determine the deflection and slope at point B. Use E = 29,000,000 psi. See the attached file. A beam under load deflects and bends.

• Beam deflection and Stress at corner?

  The 2000N force acting at the edge can be replaced by equal load acting at the centroid plus an additional twisting moment of the magnitude F*(Width/2).

• Wooden Crate Motion: Force, Friction, Work done

  285122 Wooden Crate Motion: Force, Friction, Work done 1) Sally expends 10460 J of energy to drag a wooden crate 24.7 m across a floor with a constant speed. The rope makes an angle of 48.0° with the horizontal.