Entropy Generation in a Steam Turbine

Related BrainMass Solutions

• Steady Flow Turbine

  106017 Steady Flow Turbine Steam at 800 kPa, 600°C enters a steady flow turbine and leaves at 100 kPa.

• Ideal Rankine cycle

  State 3 is a saturated vapor in an ideal Rankine cycle, so from the steam table you should be able to get the entropy here: s3 = 5.1044 (kJ/kgK) Across the turbine, the gas is expanded, hence pressure drops.

• Rankine Cycle

  generation ).

• Power Generation: Efficiency

  139598 Power Generation: Efficiency and the output. Question 1 [2] In a coal fired power plant the output from the steam turbine is 500 MW in the form of shaft power. This is connected to an electric turbine with an efficiency of 96 %.

• Turbomachinery: Impulse & Reaction Turbines

  Question 5: It has been decided to use the following velocity diagrams for a STEAM reaction turbine stage which is expected to have a nozzle and rotor efficiency of 80% when the stage inlet total ((not static) pressure and temperature are 17 bar, 400

• Steam turbine output power

  217937 Steam Turbine Output Power The mass rate of flow into a steam turbine is 4500 kg/h and the heat transfer from the turbine is 8.8 kW.

• Specify Control Scheme: Heat Exchanger

  A reactor is cooled by circulating liquid through a heat exchanger that produces low-pressure (10 psig) steam. This steam is then split between a compressor and a turbine. The portion that goes through the turbine drives the compressor.

• Turbine Thermo Steam Velocity

  a turbine thermo steam velocity.

• Simple Vapor Power Plant

  Determine a) enthalpy of steam leaving the turbine b) turbine work output per Kg of steam circulating c) pump work input per Kg of water circulated d) heat input in the boiler per Kg of water circulated e) thermal efficiency of the cycle