Voltage Curves

Related BrainMass Solutions

• Electrical Energy Conversion: Synchronous Generator

  Name the 2 curves shown on the graph, and indicate briefly how they are found. Why is it that one is a straight line, but the other exhibits a curve? c.

• Circuit analysis problem

  Write the phase difference between the voltage and current across a load with impedance Z = 2+2j Ohms under AC steady state conditions? Question 2. (9 Points) In answering the following questions please refer to the curves a-I above. a.

• Transformers, protection of and temperature rise time

  heating curves for different loads to determine time before transformer temperature rating exceeded for adding increased load.

• higher voltage.

• Graph source and load voltage of a circuit

  The correct sketch of the source voltage and the load voltage vL(t) as a function of time will then be: Please show the source voltage in solid and the load voltage in dashed See attached file for full problem description.

• Regulation of power supply & Gains of CE amplifier

  Hence, % voltage regulation = [(No load voltage - Full load voltage)/No load voltage]x100 .......(1) Given : % regulation = 10%, Full load voltage = 24 V Substituting in (1) we get : 10 = [(No load voltage - 24)/No load voltage]x100 Or

• Electricity

  Solution: Current=Voltage/Resistance Let the Voltage be 10 volts and the Resistance be 5 ohms.

• Circuit analysis with LEDs, BJTs, Relays, Opto Couplers

  =1V and the LED voltage, V_LED=2V The voltage at point X is therefore, V_X=1+2=3V Then the voltage across R_2 is the difference between the V_CC rail and V_X, thus V_(R_2 )=9-3=6V Voltage across the relay coil, V_R By inspection of the

• Help determine line-to-line voltage of a circuit.

  Voltage between Line1 and Line2 is Voltage between Line1 and neutral + Voltage between neutral and line2 (From the theories of 3 phase circuits) If the line to neutral voltage is 240 V, Then line to line voltage must be 480 V.