Purchase Solution

Help determine line-to-line voltage of a circuit.

Not what you're looking for?

Ask Custom Question

If the line-to-neutral voltage in a three-phase Y-connected circuit is 240 volts, determine the line-to-line voltage.

Purchase this Solution
Solution Summary

The solution determines the line-to-line voltage with detailed steps provided.

Solution Preview

Y connected networks have 3 lines separated by 120 degree phase angle. 4th line is the neutral. The arrangement is ...

Purchase this Solution
Free BrainMass Quizzes
Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

Basic Physics

This quiz will test your knowledge about basic Physics.

View More Free Quizzes
Related BrainMass Solutions

  • Electrical Energy Conversion: Synchronous Generator

    Determine: - the excitation voltage (magnitude and angle) - the open-circuit phase voltage - the voltage regulation - the no-load voltage if the field current is reduced to 60% of its value at rated load. a.

  • AC Power and Transmission Lines

    18327 AC Power and Transmission Lines An AC power generating station provides single phase power to a consumer 100 the generator end of the voltage at miles away, over a transmission line. The voltage at the consumer end of the line is 10KV.

  • Saturated and unsaturated synchronous reactance

    137037 Saturated and unsaturated synchronous reactance The following readings are taken from the results of an open- and a short-circuit test on a 9375-kVA three-phase Y-connected 13,800- V (line-to-line) two-pole 60-Hz turbine generator driven at synchronous

  • RMS and Line-to-Line Voltages

    For example, when the equivalent circuit of the induction motors is used, the voltage per phase must be used to do calcuation in such circuit. I hope this can help you to understand. This solution explains how RMS is calculated.

  • Power Computations

    328601 Calculate the open-circuit power absorbed from the supply by the transmission line. Please show as much working as possible and comment where possible. The figure in attachment represents a high-voltage transmission line.

  • Transformer with Resistance

    88239 Transformer with Resistance A transformer connected to a 120V line is to supply 12 V to a circuit that has a resistance of 2 ohms. 1) If the primary side of the transformer has 1000 turns, how many turns must the secondary side have to achieve

  • Modeling of a high-voltage transmission

    Regards, Your TA This problem provides the solution of how to model a high voltage transmission line by a two port network.

  • General Electrical Engineering Questions

    A series RLC circuit is connected to a 5 V supply, the frequency of the supply is adjusted to give a maximum current of 11.9 mA at 2.5 kHz. The Q factor is 70. Determine the component values of the circuit. 4.

  • RF Electronics & Analysing the Magnetron Drive Circuit

    FOR CIRCUIT DIAGRAM} VS = 1 kV, LCH = 3.12 H, L = 160 nH, C = 260 pF, no. sections in LC delay line n = 20 Figure 1: A Magnetron Drive Circuit (Q1) Determine an estimate for the required number of turns (N

View More Related Solutions