Purchase Solution

Transformer with Resistance

Not what you're looking for?

Ask Custom Question

A transformer connected to a 120V line is to supply 12 V to a circuit that has a resistance of 2 ohms.

1) If the primary side of the transformer has 1000 turns, how many turns must the secondary side have to achieve this reduction in voltage?

2) Calculate the power into the primary and power output from the secondary.

Please post in word or pdf format. Thanks! problem is attached.

Purchase this Solution
Solution Summary

This solution uses the number of turns divided by voltage equation to determine the reduction in voltage of the circuit, and in addition calculate the power into the primary and power output from the secondary side.

Purchase this Solution
Free BrainMass Quizzes
Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

The Moon

Test your knowledge of moon phases and movement.

View More Free Quizzes
Related BrainMass Solutions

  • Transformer and Power Transfer

    The maximum power transfer can be achieved when the load resistance is equal the output resistance of the amplifier. Using a transformer, the 16Ω resistor can be transformed to 300Ω using the transformer.

  • AC Circuits - Transformers

    Solution: The secondary voltage is equal to: The total resistance acting on the secondary winding circuit is equal to: The source resistance should be equal to the load resistance, so they are both half the total circuit resistance:

  • Transformer

    386891 Transformer Winding Regulation A 415V to 11 kV transformer has a rating of 200 kVA. The winding resistance and leakage reactance when referred to the primary are 0.014 and 0.057 ohms respectively.

  • Transformer Regulation / Efficiency

    83470 To determine the equivalent winding resistance, percentage regulation, efficiency of a single phase transformer. A single-phase transformer is rated 100kVA, 2200:440 volts.

  • Reducing power losses in transmission of alternating currents.

    Use of step up transformer increases the voltage from the source of EMF and the use of step down transformer decreases the same at the load resistance where we use the power.

  • Parameters of a Transformer

    The load resistance in the secondary coil for an ideal transformer are given. The expert provides equations for both the primary and secondary coil. The voltage and turns of the primary coil are determined.

  • Calculating Source Impedance for a Transformer for Max Power

    Also we need to use the transformation for primary resistance to secondary resistance or impedance Z1/Z2.

  • Transformer

    The winding resistance and leakage reactance when referred to the secondary are 0.0142 Ohm and 0.0569 Ohm respectively. Determine the % regulation of the transformer at: (a) unity power factor (b) 0.8 power factor lagging.

  • Finding appropriate source for the electrical load

    Have variable transformer for source. How do I calculate or choose the voltage needed to run all four circuits with out blowing them all up, and at the same time run each circuit by themselves or two at a time or three, etc.

View More Related Solutions