# Twisted Pair

Please reference this figure for the question:

8. Given Figure 1, determine the power level that must be transmitted at Point D to support a theoretical capacity of 20kbps at point E for both Category 3 and Category 5 UTP. The following assumptions are used for the media:

- Unshielded Twisted Pair with a length of 400 meters

- Frequency of operation is 1MHz with a bandwidth of 10kHz

- Noise power of 0.01 watts at Point E

https://brainmass.com/computer-science/performance-of-systems/twisted-pair-power-level-question-237004

#### Solution Preview

check attachment

Please reference this figure for the question:

8. Given Figure 1, determine the power level that must be transmitted at Point D to support a theoretical capacity of 20kbps at point E for both Category 3 and Category 5 UTP. The following assumptions are used for the media:

- Unshielded Twisted Pair with a length of 400 meters

- Frequency of operation is 1MHz with a bandwidth of 10kHz

- Noise power of 0.01 watts at Point ...

#### Solution Summary

The expert examines a Twisted Pair and Power Level question.