Heat and Temperature: Method of mixture.

Related BrainMass Solutions

• Heat transffer and specific heat: Mixture method

  34093 Heat transfer and specific heat: Mixture method A 150 gram aluminum container contains 100 grams of water at 30 C, 50 grams of copper is add at 100 C and 40 grams of ice at 0 C. How do I calculate the final temperature of this mixture?

• Heat: Change in phase and latent heat capacity

  To two decimal places what fraction of the ice melts? The problem is based on mixture method.

• Heat and Temperature: Specific heat capacity

  192628 Heat and Temperature: Specific heat capacity Please see the attachment. Please see the attached file. Two problems based on method of mixture to find increase in temperature.

• Latent heat: Melting of ice.

  If the whole of the ice is not melted and we read the temperature of the mixture and calculate the latent heat of ice it will come less then the actual value, because still for correct value the heat to be absorbed by the ice to be melted, and the temperature

• Final temperature of the mixture of steam and ice

  Answer: final temperature of the mixture= 40.19 degrees Celsius The solution calculates the final temperature of a mixture of steam and ice.

• A piston-cylinder device has a volume of 0.1 cubic meters an

  A piston-cylinder device has a volume of 0.1 cubic meters and contains 0.5kg of steam at 0.4 MPa. Heat is transferred to the steam until the temperature is 300 degrees Celcius, while the pressure remains constant.

• Method of Mixtures: Using the equation, show the final equation needed to solve for each variable: C1 m1 (Tf - Thot) + C2 m2 (Tf - Tcold) = 0

  Method of Mixtures: C1 = specific heat of mass one (m1) C2 = specific heat of mass two (m2) Thot = temperature of hot mass Tcold = temperature of cold mass Tf = final temperature of the mixture Using the following equation, show the final equation

• Chemistry Problem Set: Heat Energy and Temperature

  water at an unknown twmperature, the final temperature of the resulting mixture is 47.9C.

• Heat capacity

  The mixture of hot iron and aluminum is then dropped into 97.7 g of water at 24.2°C. Calculate the final temperature of the metal and water mixture, assuming no heat loss to the surroundings.