Purchase Solution

Gas Laws: Mass of steam

Not what you're looking for?

Ask Custom Question

A 5-m3 rigid vessel contains steam at 20 M Pa and 400°C. The mass of the steam is:

Purchase this Solution
Solution Summary

The pressure, temperature and volume of steam is given. The mass of the steam is calculated.

Solution Preview

Solution:
When the isothermal of a real gas are plotted, pressure verses volume, we are getting smooth curves at high temperatures but as the temperature is decreases the curve changes in shape. At higher temperatures the curves shows the ideal nature of the gas but at lower ...

Purchase this Solution
Free BrainMass Quizzes
Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

Basic Physics

This quiz will test your knowledge about basic Physics.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

View More Free Quizzes
Related BrainMass Solutions

  • Combustion of gaseous fuels

    Atomic mass of C = 12, 0 = 16, N=14 and H = 1. Please see the attached file. A problem of combustion of a mixture of gaseous fuels is solved, showing several chemical and thermodynamic calculations based on mass and energy conservation laws.

  • Steam turbine output power

    217937 Steam Turbine Output Power The mass rate of flow into a steam turbine is 4500 kg/h and the heat transfer from the turbine is 8.8 kW.

  • Carnot Heat Engine and Well-Insulated Piston Cylinder Systems

    state of the oxygen, considered as an ideal gas: ( 2) where R = the gas constant,  = the universal gas constant ( = 8.314 kJ/kmol.K) and

  • Tension, Work and Energy Consumption

    The piston has a mass of 5 kg and an area of 300cm^2. Atmospheric pressure is 1X10^5Pa. As the gas is heated, the piston rises 8cm. How much work did the gas do during the expansion? 3.

  • Water condensation

    We assume that the steam behaves as an ideal gas. Therefore we can use the ideal gas equation of state to find out the amount of moles of water present in the chamber.

  • Calculations of Steam Distillation

    After we have figured that out, we can use the formula above: m1/m2 = 150*27 / 18*733, where m1 = the mass of the natural compound and m2 = the mass of the water.

  • Molarity, electron configuration, and concentration

    39901 Molarity, electron configuration, and concentration Question 31 What is the molarity of a solution in which 26.0 grams of BaCl2 (molar mass = 208.2 g/mol) are dissolved in enough water to make 450.0 mL of solution?

  • Rankine Cycle - Net Power, Thermal Efficiency and Heat Transfer

    The mass flow rate of steam entering the first turbine stage is 2.63*10^5 Kg/h. Each turbine stage operates with an isentropic efficiency of 58%. The pump operates with an efficiency of 80%.

  • Heat energy needed to raise water temperature from 50 degrees F to 212 degrees F?

    So Qgas = (mcdeltaT)gas = 134,946 (Btu/min) c = specific heat of steam. Since the steam is changing from 510F to 100F, we use an average temperature of steam at 610/2 =305F. From the table in the reference, we have c = 0.56 Btu/lb.F.

View More Related Solutions