Expansion of Solids: Using the following equation, show the final equation needed to solve for each variable: ?L = x Lo ?t

Related BrainMass Solutions

• Thermal Conductivity: Using the following equation, show the final equation needed to solve for each variable: Q/t = KA (T2 - T1)/L

  needed to solve for each variable: Q/t = KA (T2 - T1)/L Solve for: K = A = L = T2 T1 T2 - T1 = Q = t = ?

• Specific Heat

  84212 Show the final equation needed to solve for each variable Specific Heat: C = specific heat Q = amount of heat m = mass Δt = temperature change Using the following equation, show the final equation needed to solve for each variable: Q = Cm

• How do you solve for u(x,t) using separation of variables?

  In other words, u(0, t) = u(L, t) = 0 with u(x, 0) = f(x) and (u_t)(x, 0) = 0 a) Solve for u(x,t) using separation of variables. Show that the damping shifts the frequency for each mode and that the solution decays exponentially in time.

• Biochemical Oxygen Demand

  Filling in your givens: 150 = Lo (1-exp (-0.23)(5)) Rearrange and solve for Lo. b.

• Ideal Gas Law: Using the following equation, show the final equation needed to solve for each variable

  84216 show the final equation needed to solve for each variable See attached file.

• How do you find the differential equation of motion?

  You might want to try to solve this problem using these hints: The mass of the hanging part is proportional to its fractional length (i.e, m=Mx/L where M is the total mass of the rope and L is the total length).

• The Heat Equation on a Metal Ring

  Substitue this expression into the heat equation, and obtain a differential equation for each (A_n)(t). Using the correct initial conditions, solve each ODE and write down the final solution. b) Suppose f(x) = cos^2 (x).

• 1D heat equation with variable diffusivity

  Consider the solution of the heat equation for the temperature in a rod of length L=1 with variable diffusivity: u_t = A^2 d/dx (x^2 du/dx) The derivatives are partial derivatives.

• Calculate: AM, SSB Reception and Modulation

  C = 1/(2pi*fc)^2*L (2) Now put in values for lower tuned frequency fc = 500 kHz and solve for the tuning capacitance required to derive this frequency using (2).