Determine Inertia, Damping, and Stiffness

Related BrainMass Solutions

• Mechanical Vibrations Questions

  Because of material considerations and static deflection, the stiffness is fixed at 500N/m and the natural damping in the system is 10kg/s.

• Inertia, Dampness, Stiffness of Equation and Stiffness Constant

  Inertia, Dampness, Stiffness of Equation and Stiffness Constant are investigated.

• Problem involving Differential Equations

  Determine the motion of the mass. Decribe its motion in as much detail as possible. Please see attached. Attached The vibration frequency of unforced spring-mass-damper systems depends on their mass, stiffness, and damping values.

• Suspension and Distance of Compression

  The spring's stiffness k is 12kN/m and the damping coefficient C is 9 kNs/m. If at time t = 0, x =20mm and dx/dt =0, determine the resulting motion of the car. I have attached the solution. Thank you.

• Oscillation of pendulum, inertia, amplitude, wave speed

  Using (1) we can determine the period of this pendulum where (1) , the mass is total mass of the pendulum (rod plus bob so we substitute for in the above, and is the distance where the moment of inertia is measured relative to the pivot

• Mechanical Vibration and Springs

  The block has height h = 1 m and square horizontal section with a = 1.2 m and is supported at the corners by 12 springs of stiffness k = 2000 N/m.

• Damping and Resonance Problem : Forces and Displacement

  The particle is suspended by a spring of natural length lo and stiffness k and a damper of damping constant r from a platform of height d which is fixed to the Earth.

• Solutions on bearings, gears maintainability problems

  The stiffness, k, of a linear spring used for vibration damping is 120 lbf/inch. Calculate the resisting force on the spring for a deflection of 0.2 inch.

• Differential equations

  Using the paradigm, what are the inertia, dampness, and stiffness.... Use the energy integral lemma.... Use reduction of order to solve.... Please find the solution in the attached files.