Purchase Solution

plot the real power delivered to the load

Not what you're looking for?

Ask Custom Question

For the circuit attached, plot the real power (watts) delivered to the load as the load is varied as indicated. Please use Matlab and include equations used to plot. Please send source code.

A)Plot power vs RL as RL = 800 to 1200 in steps of 20 with XL =1000.

B)Plot power vs XL as XL = 800 to 1200 in steps of 20 with RL = 1000.

Circuit is attached.

Attachments
Purchase this Solution
Solution Summary

The solution first calculates the real power delivered to a load. Then it shows how to plot the power when the load varies in Matlab.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • current and average power delivered to the load

    191248 current and average power delivered to the load A load has a 20 ohm resistor and a 4 henry inductor connected in series. It is connected to a power source with v(t)= 100cos50t, connected in series to the load.

  • Average Power Delivered to Load Resistors

    Solution attaches a .doc file showing the calculations necessary to calculate power delivered to each load resistor in a lossless line.

  • Reactive Power Absorbed by a Line

    The phase voltage and the per-phase current delivered by the source are given as: V1 = 120V and I = 5 angle 0 degrees correspondingly. Calculate the total three-phase real and reactive power absorbed by the line.

  • maximum power to the load and the current through resistor

    It finds the maximum power delivered to the load resistor. Also, by applying source transformation, it finds the current through a resistor. The solution is detailed and has a '5/5' rating.

  • Load Test on a 3 Phase Induction Motor

    Calculate the output power at each load level. Calculate the total input power at each load level. Calculate the efficiency of the motor at each load level. Calculate the slip s at each load level.

  • maximum power delivered to load

    What is the maximum power that can be delivered to the load R? 2. What value of R achieves that? Please see the attached file. It finds the maximum power delivered to load from a battery with an internal resiistance.

  • Terminal Voltage & Power Supplied/Dissipated

    c) What is the power supplied by the source to the circuit as modeled by the load resistance? d) Plot the terminal voltage and power supplied to the circuit as a function of current. Repeat I_T= 0,5,10,20,30 A.

  • Investigating power levels at load through a bandpass filter

    The filter is put in place and the solution shows how to determine the power dissipated in the load resistor when operating out of band at a frequency 500 Hz and in band at a frequency of 2 kHz for the same input power.

  • Maximum Power Theorem

    b) Calculate the output voltage for different load resistors and the corresponding power and enter these values in Table 1. c) Plot a graph of load resistance vs power using Matlab (use semilog format as shown in Fig. 5.3 (see attachment)).

View More Related Solutions