Purchase Solution

current and average power delivered to the load

Not what you're looking for?

Ask Custom Question

A load has a 20 ohm resistor and a 4 henry inductor connected in series. It is connected to a power source with v(t)= 100cos50t, connected in series to the load. What is the impedance, the current, and the average power delivered to the load using the phasor transform method.

Purchase this Solution
Solution Summary

Using phasor transform method, the solution explains how to calculate the impedance, current, and the average power delivered to the load, which is composed of a resistor and an inductor in series.

Solution Preview

Please see the attached file for detailed solution.

Stumped on this problem, can someone please help
A load has a 20 ohm resistor and a 4 Henry inductor connected in series. It is connected to a ...

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Average Power Delivered to Load Resistors

    77143 Average Power Delivered to Load Resistors A 50 ohm lossless line is terminated with 60 30 ohm resistors in parallel. The voltage at the input to the line is V(t) = 100cos(5 x 10^9t) and the line three-eighths of a wavelength long.

  • Transfer Function, Impulse Response and Steady State Analysis

    A load has a 20 ohm resistor and a 4 Henry inductor connected in series. It is connected to a power source connected in series with the load. What is the average power delivered to the load?

  • maximum power to the load and the current through resistor

    It finds the maximum power delivered to the load resistor. Also, by applying source transformation, it finds the current through a resistor. The solution is detailed and has a '5/5' rating.

  • DC power supply design

    It is to supply an average d.c. voltage of 28 volts and an average current of 20 A at a ripple factor of 0.005. Determine: a) The r.m.s. ripple voltage. b) A suitable value of smoothing capacitor.

  • Transfer Function

    It is connected to a power source with v(t) = 100 cos(50t), connected in series with the load. What is the average power delivered to the load? Please see attached file for the solution to the given problems.

  • plot the real power delivered to the load

    188969 plot the real power delivered to the load For the circuit attached, plot the real power (watts) delivered to the load as the load is varied as indicated. Please use Matlab and include equations used to plot. Please send source code.

  • Analysis of an ASK OOK Baseband Digital Link

    From this some transmission line parameters are defined and link derived parameters are used to determine the power delivered to the recieving end of the line and the average voltage pulse height of the recieved symbols

  • Reactive Power Absorbed by a Line

    The phase voltage and the per-phase current delivered by the source are given as: V1 = 120V and I = 5 angle 0 degrees correspondingly. Calculate the total three-phase real and reactive power absorbed by the line.

  • Circuit Elements - Power

    (You can also use the current divider equation switching R1 and R2) (c) To find the total power delivered by the current source, first find the equivalent load resistance: 10W || 40W = 8W.

View More Related Solutions