Purchase Solution

Calculate the Complex power of a load

Not what you're looking for?

Ask Custom Question

Calculate S, the Complex power of a load (In rectangular form), given the following data:

Q = 2000 VAR
PF = 0.9 leading

See attached file for full problem description.

Attachments
Purchase this Solution
Solution Summary

The problem has been solved step by step explaining fundamental principles.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Complex power and impedance of a load

    128198 Complex Power and Impedance of a Load An electrical load operates at 240 Volts rms. The load absorbs an average power of 8 kW at a lagging power factor of 0.8. a) Calculate the complex power of the load.

  • Complex Power and Impedance

    36811 Complex Power and Impedance Question: An electrical load operates at 240 volts rms. The load absorbs an average power of 8 kW at a lagging power factor of 0.8. a) Calculate the complex power of the load.

  • Problem on complex power

    a) Calculate the complex power of the load b) Calculate the impedance of the load The solution is provided in the attached word file. Thanks for using BrainMass.com.

  • Complex Power of a Load

    81022 Complex Power of a Load Calculate S, the complex power of a load (in rectangular form), given the following data: Vrms = 220 V, P = 1kW, magnitude of Z = 40 ohm (inductive). a. S = 2000 - j150.3 VA b. S = 1000 + j681.2 VA c.

  • Complex Power

    80763 Calculate complex power in an inductive circuit Calculate S, complex power of a load (in rectangular form), given the following data: magnitude of S = 600 VA; Q = 450 VAR (inductive). See attached file for full problem description.

  • Complex power of electrical load

    70673 Complex power of electrical load An electrical load operates at 240 Vrms. The load absorbs an average power of 8kW with 0.8 lagging power factor. How do I compute the complex power of the load and impedance?

  • Modeling of a high-voltage transmission

    (a) Given the parameter values in TABLE A and if the magnitude of the receiving-end line voltage VRL is measured as 154 kV when feeding a balanced load of 40 MVA at a power factor of 0.9, calculate the value of the sending-end phase voltage VSP and sending-end

  • Calculating Source Impedance for a Transformer for Max Power

    The thing to note is that maximum power transfer occurs for a transformer when the source and load impedances are complex conjugates of each other.

  • A Three-Phase Overhead Transmission Line

    Using the short line method calculate the sending-end three-phase complex power and the transmission line efficiency. Please see the attach file.

View More Related Solutions