Purchase Solution

T-Attenuator

Not what you're looking for?

Ask Custom Question

A T-attenuator is required to be inserted between an amplifier and a transmission line. The power level to the line is required to be restricted to -3 dB. The gain of the amplifier is fixed at 24 dB and its maximum input signal is at a level of -10 dB.

Sketch a block diagram of the arrangement and calculate suitable values of pad resistance if both the amplifier and the line have a characteristic impedance of 600 Ohm.

Please show as much working as possible and comment where possible.

Purchase this Solution
Solution Summary

This posting contains the solution to the given problems.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Attenuators and Maximum Power Transfer Problems

    Using the Delta-Star transformation, obtain the equivalent T -section symmetrical attenuator pad Please see attached file for the complete solution to the problem. Thanks for using Brainmass.

  • Ouput power level of an attenuator is determined

    423890 Power Level of the Attenuator An attenuator has an attenuation of 20 dB over the frequency range 100r MHz to 1.0 GHz. A signal at the input of the attenuator has a frequency of 450 MHz and a power level of 10 dBW.

  • Power Level for Attenuator

    505634 Power Level for Attenuator An attenuator has an attenuation of 20 dB over the frequency range 10 MHz to 1.0 GHz. A signal at the input of the attenuator has a frequency of 250 MHz and a power level of - 10 dBW.

  • Determining the Output Power Level of the Attenuator

    346295 Determining the Output Power Level of the Attenuator An attenuator has an attenuation of 10 dB over the frequency range 10 MHz to 1.0 GHz. A signal at the input of the attenuator has a frequency of 257 MHz and a power level of 10 dBW.

  • Power Dissipation Problems

    Since the frequency is within the range of the attenuator, we have: P = 63.25W*(10^(-6/10)) P = 15.89W In dBW: P(dBW) = 18.01 - 6 P(dBW) = 12.01 dBW d.

  • Technical writing: a business letter in proper form

    I am interested in an oscilloscope probe having a 10-to-1 attenuator with an input impedance greater than 20 megohms. What is the list price for this particular equipment? Do you have discounted pricing for quantity purchases?

  • Business Letter Organization

    You are asked to determine if Marken Industries makes an oscilloscope probe having a 10-to-1 attenuator in it with an input impedance greater than 20 Meg Ohms. You also want to know how much it would cost.

  • Cause and effect of using silicone based hearing protection

    Another type provides a flat frequency attenuator that is important for musicians and others who need to reduce noise but still hear accurately.

  • Solutions to Various Problems in Vector Calculus

    We have c(t) = (x(t), y(t), z(t)) where c(0) = (0, -5, 1) and c'(t) = (x'(t), y'(t), z'(t)) = (t, e^t, t^2).

View More Related Solutions