Max load calculation for a steel pipe

Related BrainMass Solutions

• Calculation of percentage heat reduction

  444379 Calculation of percentage heat reduction Water at 90 C flows through a 50mm bore steel pipe of wall thickness 8 mm. Ambient temperature is 18 C. Calculate the heat loss per metre length of pipe.

• Maximum acceleration

  T -mg = m*a => Tmax - m*g = m*a(max) g = gravitational acceleration = 9.8 m/s^2 => a(max) = (Tmax - m*g)/m = (400 - 25*9.8)/25 = 6.2 m/s^2 --Answer This solution provides a brief calculation for max acceleration using maximum load, gravitational

• Simple Beam Concentrated Load at a Point

  I is the moment of inertia for the cross-section. For a rectangular cross-section, the inertia is calculated in the formula shown below: Max. Bending Stress = s = 1000 psi The expert examines a simple bean concentrated load at a point.

• Operations Management: Purchase vs Make Case Study

  Then the seam is joined in a welding process. For a 10-inch-diameter pipe of 16-gauge steel, it takes about six minutes per piece to roll, including loading and unloading the part.

• Statistics - Linear Programming Problem

  The company I work for makes stainless steel surgical bars and bronze pipe. Each pound of stainless steel surgical bar takes approximately .25 hours of labor and uses roughly 5 kilowatts of electricity.

• Economic Order Quantity

  52010 Nowlin Pipe and Steel Nowlin Pipe & Steel has projected sales of 72,000 pipes this year, an ordering cost of $6 per order, and carrying costs of $2.40 per pipe. a. What is the economic ordering quantity? b.

• Find Total Head Loss

  (larger than 2000 the flow is turbulent) For commercial steel pipe the absolute surface roughness is = 0.00015 ft (from fluid Mech.

• Thermodinamics

  272959 Thermodinamics In an experiment, a 0.050m3 bomb is initially evacuated.It is then filled with air supplied from a reservoir at 1MPa, through a long steel pipe, in which a solenoid valve is placed.

• Statistics - Test claim

  Test the company's claim at a = 0.05. The solution file is attached The expert examines the test claim for steel pipe fittings. A complete, neat and step-by-step solution is provided in the attached Excel file.