Mass moment of inertiona of a steel part.

Related BrainMass Solutions

• Physics: Equilibrium, balance point

  When a 0.75 kg mass is hung from that end, the balance point moves 8.0 cm toward that end. Find the mass of the beam. 3. A 1.0-m radius flywheel is to be made from steel in the form of a solid disc.

• Rotational Dynamics

  A piece of steel is pressed in the normal direction against the wheel with a force of 9 Newtons. The coefficient of friction between steel and wheel is .21. How long will it take the wheel to stop?

• Mass Moment of Inertia and Translational Motion

  37393 Mass Moment of Inertia and Translational Motion 1. Calculate the mass moment of inertia about the x axis. The total mass of the object is 13 kg. 2. The plate with two holes is made of steel with a density of 7800 kg-m3.

• Stopping distance

  50057 Stopping Distance A load of steel of mass 6000 kg rest on a flat bet truck. It is held in place by metal brackets which can exert a maximum horizontal force of 8000 N.

• Calculate tension in a steel wire under water connecting a buoy to the sea bed

  If the diameter of the buoy is 1.3m and the mass of the buoy is 20kg: a) determine the tension in the wire b) if this tension produces an extension in the steel wire of 4.0mm, calculate the length of the wire.

• Physics of Using Dumbbells and Case of George of the Jungle

  A second vine of equal length hangs from the same point, and a gorilla of larger mass M swings in the opposite direction on it. Both vines are horizontal when the primates start from rest at the same moment.

• Max load calculation for a steel pipe

  80189 Max load calculation for a steel pipe A section of 51 mm diameter standard-weight steel pipe is bent as shown in the figure below and embedded in a concrete footing.

• Equilibrium and Force Distribution Problem

  38129 Equilibrium and Force Distribution Problem A uniform steel beam has a mass of 1178kg. On it is resting half of an identical beam, as shown in the figure attached. What is the vertical support at the right end. How about at the left end?

• Materials To Construct An Industrial Building

  If 0.60 m^3 of steel is required for the same structural support as 1.25 m^3 of wood, how much more mass will the building have as a result of this decision? (Approximate the density of steel by that of pure iron.