Relationship between thermal conductivity and specific heat?

Related BrainMass Solutions

• Scattering Mechanism in Metals

  Solid State Physics, by A.J Deker This solution looks at the scattering mechanism in metals and uses concepts of thermal conductivity, specific heat capacity and thermal range

• Heat content or Btu value of water at various temperatures?

  (c) Suppose a body of mass m_1, specific heat c_1, and temperature T_1 is in thermal contact with another body of mass m_2, specific heat c_2, and temperature T_2, and the two are left alone isolated from the rest of the world.

• Heat Engine Efficiency

  The relation between A,L and the amount of heat transferred through the rod per unit time is dQ/dt =(KA(T1-T2))/L Here dQ/dt is the change in heat transferred through rod per unit time and k is the coefficient of thermal conductivity.

• Thermal Conductivity: Using the following equation, show the final equation needed to solve for each variable: Q/t = KA (T2 - T1)/L

  Thermal Conductivity: K = thermal conductivity A = cross section of the are of the heat flow L = thickness of material (T2 - T1) = temperature deference Q = amount of heat transferred t = time Using the following equation, show the final equation

• density of liquid methanol

  201424 density of liquid methanol Determine the density of liquid methanol in (lb/ft^3) and convert heat capacity, thermal conductivity and viscosity from SI units to English Units.

• Calculation of percentage heat reduction

  Data: a) the thermal conductivity of steel is 45 W/mK. b) the thermal conductivity of felt is 0.05 W/mK. c) the outside surface heat transfer coefficient is 20.0 W/m2K. d) the inside surface heat transfer coefficient is 2500 W/m2K.

• Determining Shape Factor: Thermal Conductivity and Heat Loss

  181613 Determining Shape Factor: Thermal Conductivity and Heat Loss A thin disk is maintained at 75 degrees celsius and placed on the surface of a large medium maintained at 10 deg C.

• Heat conduction in a cylinder.

  We start with Fourier's law: where Q is heat transfer rate, K is thermal conductivity, A is the surface area of conduction, and T is the temperature.

• Rate of Heat Loss through a Window

  In this problem rate of heat loss through a window and inner surface temperature have been determined using thermal conductivity and resistance values. The solution is detailed and well presented.