Find the Reactions of the Dual Hinged Beam

Related BrainMass Solutions

• Tension - Equilibrium and Elasticity: Five problems

  Let the length of strut be l, vertical and horizontal components of reactions be V and H.

• Tension and Moments

  76536 Tension and Moments A 20.0 kg floodlight in a park is supported at the end of a horizontal beam of mass 20.0 kg and length L that is hinged to a pole (beam and pole are perpendicular).

• Calculating Tension, Horizontal Force, and Vertical Force

  A cable at an angle of alpha=34.6 degrees with the beam helps to support the light. 1.) Find the tension in the cable. 2.) Find the horizontal force exerted on the beam by the pole. 3.)

• Assignment Question 3 in Applied Mechanics

  Q3 shows a rigid light beam which is hinged at O to a wall. The beam carries a point mass of m at the free end.

• Loading a Horizontal Beam

  For the loading shown, find all the reactions. Please see the attached document. Please double-check the calculations. This solution helps with a problem regarding a horizontal beam.

• Simple Beam Concentrated Load at a Point

  18738 Simple Beam Concentrated Load at a Point Draw the shear and bending moment diagram for the beam shown and find the value of the maximum bending stress. This case is a Simple Beam Concentrated Load at a Point.

• static engineering systems for stress and bending moments

  The vertical reactions can be determined by writing the balance of forces and moments: - forces: ( 1) - moments (about the support

• Shear forces and bending moments

  For the loaded beam shown in FIGURE 1 : (a) Determine the vertical reactions at the supports. (b) Sketch the shear force diagram for the beam. (c) Calculate the bending moment at 1m intervals along the beam.

• Beam and reactions

  35991 Beam and Reactions Calculate the magnitude of the reaction (See attached for full question and diagram). See attached file. The solution calculates the magnitude for the reaction provided.