Purchase Solution

Physics sample solution: transverse biaxial tensile stress

Not what you're looking for?

Ask Custom Question

Consider a 4-in square steel bar subjected to transverse biaxial tensile stresses of 20 ksi in the x direction and 10 ksi in the y direction. (a) Assuming the bar to be in a state of plane stress, determine the strain in the z direction and the elongations of the plate in the x and y directions. (b) Assuming the bar to be in a state of plane strain, determine the stress in the z direction and the elongations of the bar in the x and y directions. Let E= 30x103 ksi and v = 0.25.

Purchase this Solution
Solution Summary

The solution determines the strain in the z direction and the elongations of the plate in the x and y directions and determines the stress in the z direction and the elongations of the bar in the x and y directions.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Mechanics of Composite Materials: Orthotropic Lamina

    Data: Solution: Since lamina is subjected to stresses on principal directions (fibers and transverse), we will apply directly the Tsai-Hill criterion, bat we need to consider the nature of stress (tensile or compressive

  • Complex Loading Systems: Longitudinal, Transverse Deformation

    Determine the longitudinal deformation, transverse deformation and the change in volume. See the attached file. See attachment. The solution determines the longitudinal deformation, transverse deformation and the change in volume.

  • Mechanics of composite materials: "orthotropic lamina"

    Data: Solution: Strains oriented upon and transverse to fibers are related to stresses by means of equations: ( 19)

  • A Question and solution concerning linear thermal expansion

    352360 Physics Stress Magnitude in 1025 steel bar due to linear thermal expansion in the bar unconstrained and constrained 1) (a) If a rod of 1025 steel 19.7 in. long is heated from 68 to 176ï?

  • tensile force and corresponding normal stress of a wire

    = 0.001639 Stress = E * Strain = 29 * 106 psi * 0.001639 = 47420psi or 47.42 ksi Stress = Tensile force P / area of cross section of the wire Tensile force P = Stress * area of cross section of the wire = 47.42ksi * 0.001639 = 2.33

  • Important information about Stress

    We have the general formula to find the stress of a material Stress = Force / Area Therefore, N/m2 This solution calculates stress on steel given its cross section and tensile force. The stress on the material is determined.

  • Tensile stress

    42174 Tensile stress A 3.14insq. cross sectional area steel tension rod carries a load of 3140lbf. How do I calculate the tensile stress in the rod? Tensile Stress = Tensile Load/ Cross Sectional Area = 3140/3.14 = 1000 psi = 1 ksi

  • Stress Due to Axial Force and Bending Moment

    Solution explains how to judge whether points are compressive or tensile in their stress.

  • Shear stress calculation

    solution calculates the ultimate shear stress of a rivet material.

View More Related Solutions