Purchase Solution

Voltage by volt-ohmmeter & EVM

Not what you're looking for?

Ask Custom Question

A voltage of 500 V is impressed on a 150 ohm resistor. The impedance of the voltage source is 10 kΩ. Two meters are used to measure the voltage across the 150-kΩ resistor: a volt-ohmmeter with an internal impedance of 1000 Ω/V and an EVM with an impedance of 11 MΩ.
Calculate the voltage indicated by each of these devices.

Purchase this Solution
Solution Summary

The solution provides a 2-page detailed and step-by-step explanation for the problem. It also includes circuit drawing and careful explanation of theory.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Find Resistance with an Ohmmeter

    62755 Find Resistance with an Ohmmeter In the ohmmeter circuit shown, the voltage drop across the ammeter and the internal resistance of the 1.5V battery are negligible.

  • Determining the Voltage of an Unknown Battery in an Old Truck

    Judging from the heat of the resistor this person believes that 12 watts of heat is being dissipated by this resistor. Determine the old truck battery voltage.

  • Making a voltage divider

    The total resistance now is 6 Ohm and it is in series with 6 volt so the current through each of them is 1 A. We will get a voltage drop of 1V across each of them. Please see the attached circuit diagram to see how we can get 4 volt from this.

  • Electrical Circuit

    Hence, V = E - 80xE/86.82 = Ex6.82/86.82 = 0.078E Current through ammeter = Voltage across 25 ohm resistor/25 = 0.078E/25 = 1.85 (Given) Solving we get E = 593 Volt Voltage drop across 45 ohm resistor = 45xE/86.82 = 45x593/86.82 = 307 Volt

  • D.C. Circuits: Resistances in Series, Parallel and Current

    The voltage across Bulb D is 1.0 volt. The battery voltage is 6.0 V. Find the voltage drops across Bulbs A, B, and C. (See attachment for circuit diagram). Please see the attached file.

  • Control of an electric heating system

    When theta_D is passed to Transducer, the Transducer provides output = 0.05*theta_D volt [Note: degree C * Volt/degree C = Volt] This output (0.05*theta_D) acts a input for the Proportional controller.

  • Ohm's Law

    a) Vab = +1+3-5 = -1 Volt b) Vab = +1+3+5 = 9 Volt c) Vab = -1+3-5 = -3 Volt d) Vab = -1+3+5 = 7 Volt 2.10 The equivalent resistance Reqv of the parallel connected resistances R2 and R3 is given by : Reqv = R2 R3

  • Basic PLC

    This solution contains step-by-step calculations and explanations to determine bit resolution, converted decimal value of volt analog input, and analop input range.

  • Simple C++ program using "if" statements.

    Assume that the transfer function (the relationship between the voltage and the movement) of the actuator is: ? Voltage less the -0.2 volt: actuator moves 1 cm/volt in the negative direction ?

View More Related Solutions