Purchase Solution

Transform a low pass filter into a band- pass filter

Not what you're looking for?

Ask Custom Question

See attachment for full problem description

Using this low pass filter:

E1 is the input and E2 is the output. Using transformation, obtain a Band Pass filter with band center of 2000 rad/sec and bandwidth B of 200 rad/sec. Draw the final circuit will all values.

Attachments
Purchase this Solution
Solution Summary

It shows how to transform a low pass filter into a band- pass filter. The solution is detailed and was rated '5/5' by the student who posted the question originally.

Solution Preview

Please see the attached file.

Using this low pass filter:

E1 is the input and E2 is the output. Using transformation, obtain a Band Pass filter with band center of 2000 rad/sec and bandwidth B of 200 rad/sec. Draw the final ...

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Understanding low, high and band pass filters

    We can also use a band pass filter which passes the frequency band of interest (here the select 10.61-10.79 MHz frequency band). 3.

  • Characteristics of a Filter

    Is this a low pass, high pass, band pass or band stop filter? b. What is the attenuation per decade between 2 kHz and 20 kHz? c. What is the attenuation at 4 kHz? d. Is this an ideal filter or does it behave like a real filter? a.

  • Filter characteristics

    Above 5 kHz the filter has steadily increasing attenuation. At 10 kHz attenuation is 6 dB and at 20 kHz attenuation is 24 dB. a. Is this a low pass, high pass, band pass or band stop filter? b.

  • Active filter

    461098 Active filter types a) What is an active filter? What are its types? b) Derive the magnitude and the phase of the system gain of the low pass active filter with a pass-band gain Apb = 10 dB, RF = 10 kOhm and Rs = 1.1 kOhm.

  • Impulse response using inverse discrete-time Fourier transform.

    Pair 1 - time-shifting: Pair 2 - basic low-pass filter pair: From the problem, we can see that: where H(ejw) is the discrete-time fourier transform of the basic low-pass filter with cut-off frequency of wc: Then, from pair

  • Frequency response of filters

    What is an all pass filter? 4. What does the frequency response of a filter measure or indicate? 1.

  • Communications Systems of Frequency Downconverters

    31273 Communications Systems of Frequency Downconverters A frequency downconverter is implemented using a square-law device as follows. The band-pass filter has a center frequency fi=|fc - ft| (also known as the intermediate frequency, IF).

  • transfer function of a high pass filter

    A high pass filter is represented, followed by a positive feedback loop containing a gain K and low-pass filter in the pathway.

  • Music signal transmitted over a digital radio link

    After the signal has been converted back to analog form by the DAC in the receiver, it is passed through a low pass filter. If the filter is an ideal brick wall LPF, what is the maximum frequency the filter should pass?

View More Related Solutions