Purchase Solution

transfer function of a high pass filter

Not what you're looking for?

Ask Custom Question

See attached file for full problem description.

A high pass filter is represented, followed by a positive feedback loop containing a gain K and low-pass filter in the pathway. Show that the above circuit's OVERALL transfer function is simply a high pass filter with gain K and time constance Tc/(1-K).

Attachments
Purchase this Solution
Solution Summary

It finds the transfer function of a high pass filter. The solution is detailed and was rated '5/5' by the student who originally posted the questions.

Solution Preview

Please see the attached file.

A high pass filter is represented, followed by a positive feedback loop containing a gain K and low-pass ...

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Low-pass, high-pass, bandpass, and bandstop filters

    (a) The impedance of resistor parallel with capacitor is From voltage divider: Thus, the transfer function of the circuit is . If , . If , . Thus, the circuit is low-pass filter.

  • Operational Amplifier Gain

    Prob 2 The circuit provided is nothing but combination of High pass Filter and Low pass Filter , which makes it a band pass filter.

  • Types and Transfer Functions of Filters

    Input signal Common ground Cutoff frequency (rad/sec) Type of filter 3 4 2400 High-pass 3 5 1200 High-pass 3 6 800 High-pass 1 6 2400 High-pass 2 5 2400 High-pass 4 3 2400 Low-pass 5 1 3600 Low-pass 1 4 7200 High-pass For any filter with a

  • Op-amp and RC circuit analysis

    42153 Op-amp and RC circuit analysis For the following circuit (see attachment), how do I find the Laplace transform of the transfer function V0(s)/V1(s)? Would this be considered a low or high pass filter?

  • Op Amp Applications Derivations

    Derivation of equation q3. derivation for gain showing high pass filter and breakpoint frequency q4. Derivation for gain showing high pass filter and the difference between an active filter and a filter in q3. q5.

  • AC Circit analysis and max power transfer

    If the output impedance of a certain driving circuit is 50 Ohm - j10 Ohm, what value of load impedance will result in the maximum power to the load? In a first order RC high-pass filter, XC = 500 ohms and R = 2.2 kohms.

  • Circuit Diagrams, Pole Frequencies, and Bode Plots

    The first order high pass filter is shown below Note that I have drawn this as 2 general impedances and as shown.

  • DSP analog filter problem

    The discrete signal m(k) in the form e^(jw) is applied to the discrete filter h(k) with an impulse response of h (k) = (0.5) k u (k). This is in essence the transfer function of a LTI system. The transfer function is described.

  • Analysing a First Order Filter Step Response.

    PART A: The general Laplace transfer function for a first order low pass filter is given by (1).

View More Related Solutions