Purchase Solution

Resistor Transfer Characteristics

Not what you're looking for?

Ask Custom Question

Write a Matlab script to plot the transfer characteristics of a resistor as shown in Fig. 1.1 (step 10) with V=1V and R=1kΩ. (Use these commands, R=1000; V=[0: 0.1:1]; I=V/R; plot(V-I)). Are these graphs identical?

See attached file for full problem description.

Attachments
Purchase this Solution
Solution Summary

This provides a Matlab script to plot the transfer characteristics of a resistor.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Transformer and Power Transfer

    The maximum power transfer can be achieved when the load resistance is equal the output resistance of the amplifier. Using a transformer, the 16Ω resistor can be transformed to 300Ω using the transformer.

  • Circuit Analysis

    Transform of s/(s^2 - 1). 3) The transfer function for a circuit is H(s) = (s-1)/((s-1)^2 + 4).

  • Circuit analysis branch

    The transfer function for a circuit is H(s) = 1/(s+4). What is the natural response of the system? 9. The transfer function for a circuit is H(s) = (s+2)/((s+2)^2 + 4)). What is the natural response of the system? 10.

  • Electricity: Power dissipated by a resistor

    h, the heat transfer coefficient, is equal to 0.2 J/(K s).

  • Low-pass, high-pass, bandpass, and bandstop filters

    (a) The impedance of resistor parallel with capacitor is From voltage divider: Thus, the transfer function of the circuit is . If , . If , . Thus, the circuit is low-pass filter.

  • transfer function and cutoff frequency of the circuit

    So check your resistor values. If you have any questions, leave me with feedback. At the cutoff, So you need to check your resistor values. It shows how to find the transfer function and cutoff frequency of the circuit.

  • Transfer Function

    The transfer function for a circuit is H(s) = 1/[(s+2)(s+5)]. What are the poles? Is this an impulse response stable circuit? 3. The transfer function for a circuit is H(s) = 1/[(s-2)(s+5)]. What are the poles?

  • Transfer Function from Voltage, Inductance, Resistance and Capacitance

    64029 Transfer Function from Voltage, Inductance, Resistance and Capacitance A battery of voltage Vi is connected in series with a resistor of resistance R, an inductor of inductance L and a capacitor of capacitance C.

  • Physics: Batteries, Resistance and Current

    What is the resistivity () of a resistor? What characteristics of a resistor affect the resistivity? Write a formula for this relationship, label each variable and indicate the units used to measure each.

View More Related Solutions