An aluminum and an iron bar are of unequal length; temperature at equal length.

Related BrainMass Solutions

• Physics 7th edition by Cutnell and Johnson,Chapter-12 and 13

  Why was important that a bar be kept constant? 2. At a certain temperature, a rod is hung from an aluminum frame, as the drawing shows. A small gap exists between the rod and the floor. The frame and rod are heated uniformly.

• Thermal Expansion in Solids

  Length of the Brass bar is 2m and coefficient of linear expansion for Brass is 19 x 10 - 6 /®C Length of the Aluminum bar is 1m and coefficient of linear expansion for Aluminum is 23 x 10 - 6 /®C Let the temperature at which the gap is closed be

• Magnetism

  The magnitude of the dipole moment associated with an atom of iron in an iron bar is 2.1 10^-23 J/T.

• Length of Wire To Support a Mass

  for every degree of K of temperature rise is b_r * L_r We want the sum of the changes of length of the rubber and the aluminum wire when temperature grows by 1K to be 0: bAl* L_Al + b_r * L_r = 0 From this we find the needed length of the aluminum

• Specific Heats and Atomic Masses Using a Calorimeter

  Use 1 cal/gram *C for water. 100 gm shots of each: iron; copper & aluminum -=hot water bath. insert in 150 ml of water at room temperature and heat to: final temperature 100 degrees of celsius insert in calorimeter with room temperature water

• Temperature Effect on Materials

  412445 Temperature Effect on Materials (i) A hollow cylinder of aluminium 1 m long with a 40 mm outside diameter is at a temperature of 20 °C. What is the change in length and circumference of the cylinder when it is cooled to â?'25 °C?

• Thermal Expansion

  Take the initial temperature to be 20 degrees C, and the young's modulus as 70 GPa Solution: Let the initial length of the rod be l and let its length increase by Δl on being heated from 20^O C (or 293 K) to (293+ΔT) K.

• Copper wire length, iron wire resistance, cost of hall light

  An iron wire has a resistance of 0.20ohms at 20°C and a resistance of 0.30ohms at 110°C. Find the temperature coefficient of resistance of the iron used in the wire.

• Turbomachinery: Impulse and Reaction Turbines

  Th temperature and pressure in the rotor are 375 K, 0.83 bar. Calculate the rotor efficiency, rotational speed and power output if it has a mean blade diameter of 220 mm, a blade length of 16,, and if it has 360 degrees of full length nozzles.