PFR (Pug Flow Reactor) and CSTR (Continuous Stirred Tank Reactor) in Parallel

Related BrainMass Solutions

• Continuous Stirred Tank Reactor (CSTR) and Plug Flow Reactor (PFR) Comparison

  The volumes of a Continuous Stirred Tank Reactor (CSTR) and Plug Flow Reactor (PFR) are compared under a certain set of circumstances. The solution is detailed and well presented.

• Continious stirred tank reactor (CSTR): Volumetric Flow Calculation

  113858 Continious stirred tank reactor (CSTR): Volumetric Flow Calculation Liquid phase reaction reversible: A + B = R + S k1 = 7l/mol*min k2 = 3l/mol*min It occurs in a continuous stirred tank reactor of 120liters. 2 streams, one with 2.8 mol

• Continuous Stirred Tank Reactor (CSTR) : Flow rate and Reactor Volume

  Flow rate and reactor volume for a Continuous Stirred Tank Reactor (CSTR) are calculated.

• Rate Equation From CSTR (Continuous Stirred-Tank Reactor) Data

  5995 Rate Equation from Continuous Stirred-Tank Reactor Data Please see the attached file for the fully formatted problem(s).

• Rate Equation from PFR (Pluf Flow Reactor) Data: Pyrolysis of Acetone

  Problem: The following conversion data were obtained in a tubular flow reactor for the gas-phase pyrolysis of acetone at 520 oC and 1 atm.

• Kinetics in Chemical Reactor

  565273 Kinetics in Chemical Reactor See the attached file. 1. The reversible exothermic water-gas shift reaction (seen in attached file), takes place in an isobaric and adiabatic PFR reactor of V=1m3.

• Mixed Reactors in Series: Calculate the Fraction Hydrolyzed in the Last Reactor

  5992 Mixed Reactors in Series Please see the attached file for the fully formatted problem(s). Acetic acid is hydrolyzed in three stirred tank reactors operated in series. The feed flows to the first reactor (V = 1 lit) at a rate of 400 cm3/min.

• Arrhenius Equation for Process/Air Pollution Control

  The basic idea is that you have a reactor (rotating dryer). The problem doesn't state the type of reactor, but I would assume it to be a CSTR (continuously stirred reactor).

• Steady State Conditions and Heat Transfer Functions

  (a) Determine the transfer function C'm{s)/C'1(s) assuming the flow rates are equal and constant: (w1 = w2 = 5 lb/min): (b) Find the response for a step change in c1 from 14 to 17 Ib/ft3.