Purchase Solution

Mechanics of Materials: Slope & Deflection

Not what you're looking for?

Ask Custom Question

A) For the cantilever beam and loading shown, determine the slope at point B. Use E = 29,000,000 psi
Choose One: .0021rad .0051rad .0175rad .0196rad

b) Determine the deflection at point B
Choose One: .113in .285in .424in .625in

Attachments
Purchase this Solution
Solution Summary

Solution attaches a file with the steps necessary to solve for the slope at a point on a cantilever and the deflection there too.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Deflection and slope of cantilever beam

    From the study of pure bending we know the relation between the radius of curvature and the applied bending moment to be given by the expression Combining the relation for curvature from calculus and that obtained from mechanics of materials yields

  • Deflection Mechanics of Materials

    61975 Deflection Mechanics of Materials The rod ABC is made of steel (E = 29 x 106 psi). Determine the deflection at point B. Choose One: .002in .004in .006in .008in Determine the deflection at point C.

  • Equation of an Elastic Curve

    The table below of beam deflection and slope shows some basic equations for elastic curve, maximum deflection, and slope at the end. The elastic curve or deflection curve is a curve or equation of the deflection of the beam with respect to x.

  • Deflection at a Slope Point

    115487 Deflection at a Slope Point For the cantilever beam and loading shown, determine the deflection and slope at point B. Use E = 29,000,000 psi.

  • Physics - Mechanics - Force

    Find the force constant of the spring, and the period of the motion which results when the mass is released. m = 0.5 kg. (a) Force constant of the spring, k = Force per unit deflection = 1/45 = 0.022 N/mm = 22 N/m.

  • Deformation of block of wood when one surface is heated

    If this were a traditional structural mechanics problem, I could reasonably determine that the vertical load (P) that could cause a deflection of 1.25 inches is approx. 144 lbs. The explanations are in the attached pdf file.

  • Deflection of Loaded Beam, Simply Supported

    580231 Deflection of Loaded Beam, Simply Supported I'm trying to determine the position and magnitude of the maximum bending moment. As well as plotting a graph of the deflection along the length of the beam at 1 m intervals.

  • Mechanics : Ten Problems

    Let the horizontal deflection of the vertical faces of the brick be theta.

  • Quantum Mechanics and Galileo's Influence

    Simply put, quantum mechanics would definitely be the more greatest advancement compared to the discovering of the DNA molecule. Quantum mechanics is the study of matter and radiation at the atomic level.

View More Related Solutions