An RC seriescircuit has a voltage source of 10Vac, a resistor of 10ohms, and a capacitor with an impedance of -j10ohms. How do I find the magnitude and phase angle of the current flow through the capacitor?

See attached file for full problem description.
18. A 120-V rms voltage at 1000 Hz is applied to a resistor and an inductor in series. If the impedance of this circuit is 110 ohms, what is the maximum value of the current?
19. A 200-ohm resistor, a 40.0-mH inductor and a 2.00-uF capacitor are connected in series with a 120

See attached file for full problem description.
1. An ac voltage at 1000 Hz is applied to a resistor and an inductor in series. The rms current in this circuit is 0.600 A. if the impedance of this circuit is 110 ohms, what is the maximum value of the voltage.
2. A 200- ohm resistor, a 40.0 mH inductor and a 2.00 uF capacitor

The problem is in the right column of the attached page. There are two # 11's so it is the one on the right.
See attached file for full problem description.
You have a 200 ohms resistor, a 0.400 H inductor, and a 6.00 uF capacitor. Suppose you take the resistor and inductor and make a seriescircuit with a voltage source th

Please refer to the attached file.
1. What is the response function of the circuit in the s-domain?
2. What are the poles? Is than an impulse response stable circuit?
3. What are the poles? Is than an impulse response stable circuit?
4. What is the natural response of the circuit?
5. Is the circuit impulse stable?
6. Is

I am having trouble with #27, I need a mapped out way to get the answers to match the back of the book.
Note: you need to use the RLC circuit in # 14 (the one in the right column) to obtain the answers in#27
27. Consider the series RLC circuit of problem 14. The voltage amplitude of the source is 150 V.
(a) At what angu

1. The impulse response for a circuit is h(t)=e^(-t), t>=0. What is the response function of the circuit in the s-domain if the input is f(t)=cos(2t)?
2. The transfer function for a circuit is H(s)=1/((s+2)(s+5)). What are the poles? Is this an impulse response stable circuit?
3. The transfer function for a circuit is H(

A person has a 72 V battery along with 6, 9, and 18 ohm resistors. They are first wired in series, then is parallel. First, sketch each circuit. Then, find the current in each resistor as well as the voltage across each resistor for each resistor, for each circuit.