Purchase Solution

Working with modulators and modulation index

Not what you're looking for?

Ask Custom Question

What percentage of modulation corresponds to a modulation index m of 0.5?

Purchase this Solution
Solution Summary

The percentage of modulation corresponding to a modulation index m of 0.5 is calculated. The solution with all explanations and mathematical steps.

Solution Preview

A modulation index of 0.5 corresponds to 50% modulation.

modulation index m = frequency ...

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Frequency Modulation

    What is the permissible range for the modulation index? 7. What is the sensitivity of an FM receiver with a 100 mV quieting voltage and a voltage gain of 50,000? 8. Consider phase locked-loop FM demodulation.

  • Calculating peak frequency deviation and Carson's rule bandwidth

    FM improvement factor is the ratio of the SNR at the output of an FM receiver to the input CNR to the same receiver and is given by the expression below in terms of modulation index We have calculated from part c,. so we can determine the FM

  • Cellular System

    Propagation in a wireless channel is sometimes modeled using the propagation index n. Explain how the propagation index n varies and why.

  • GABA and Benzodiazepines: The Mechanism of Action

    584621 GABA and Benzodiazepines: The Mechanism of Action Benzodiazepines Their mechanism of action: They are "allosteric modulators of the GABA-A chloride ionophore.

  • Frequency-modulated (FM) Signal

    Attached pdf file. 1) The modulation index for FM is m = maximum frequency deviation/modulating frequency therefore, maximum frequency deviation = m * modulating frequency = B1*fo Answer is (a) 2) TRUE, they are same Answer is (a)

  • T1 carrier over GEO satellite link, CNR and BER

    The modulation used on the link is QPSK and the implementation margin of the QPSK demodulator is 0.5 dB. a. Find the BER at the receiver output and the average time between errors. b.

  • Calculate: AM, SSB Reception and Modulation

    P(C) = V(C)^2/R = 1000 W (11) So the power transmitted (comparing (10) with (11)) is m^2/8 of P(C). As the modulation index is m = 1 so the power transmitted P(T) is given by (12).

  • Demodulator for FM Stereo Signals

    determined from Where is the modulation index.

  • FM analysis of NTSC signal

    The modulation constant of the transmitter is 1 MHz per volt. The following are answered a. What is the peak frequency deviation of the FM signal and bandwidth of the FM signal? b. The signal is received with CNR = 30.0 dB.

View More Related Solutions