Use Impedance to Find Amplitude and Phase

Related BrainMass Solutions

• Series RL Circuit

  a) What is the impedance of the circuit? b) What is the current amplitude? c) What are the voltage amplitudes acros the resistor and across the inductor? d) What is the phase angleof the source voltage with respect to the curret?

• Series circuit of a resistor, inductor and capacitor

  calculate the impedance, amplitude, voltage, and phase angle of the circuit described.

• Analysis of reflections on a transmission line

  We can use Ohm's law at this junction and say that in general the load impedance ZL is determined as the ratio of the sum of voltages at the junction and the sum of currents at the junction.

• Alternating Currents: LRC circuits, resonance

  A) Show that the current amplitude, as a function of w See Eq 1 The Net oppose to the current in an A.C. circuit is not only due to the resistance but due to the inductance and capacitance as well.

• LCR Circuit - finding currents and voltage

  We will try to find the value of current in the circuit when the frequency is 1600Hz.

• series RLC circuit

  (e) when the resistor is reduced to 100 ohms, the total impedance of the circuit is Z =R = 100. So the current amplitude is . Thus the RMS of the current is .

• Electrical and Electronic Principles

  This solution contains step-by-step explanations and calculations to find a voltage source in series with impedance and a current source in parallel with an admittance.

• Alternating currents - Phase angle, current, capacitance, and voltage

  It determines current equation using Ohm's law and uses a diagram to find resistance and phase angle.

• Various Practice Problems

  To a good approximation, the air pressure in both layers can be assumed to be the same and equal to 8.00x104 Pa. [3] (a) Find the numerical value of the ratio of acoustic impedances of the two layers. Which has the higher impedance?