Purchase Solution

Calculate the step response of the system

Not what you're looking for?

Ask Custom Question

Number 2 Only. See attached file for full problem description.

In the following circuit, all of the resistors R are identical, i1(t) is the input current and i2(t) is the output current. Calculate the step response of the system. i.e., calculate the output i2(t) when the input is a unit step function.
Please express your answer as a function of time, in terms of the parameters L and R.

Attachments
Purchase this Solution
Solution Summary

The solution explains how to calculate the step response of the system.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Linear Systems and State Space Matrices

    A linear system is described by its transfer function T(s) = s-1/ s^2 + 6s+ 5 - Derive the time-domain expression for the unit step response of this system - Sketch the unit step response of this system over 3 times the longer of the two time constraints

  • Control Systems Complex Controller

    Using MATLAB, plot the unit step response. 2. Determine the steady-state error from the plot above. Calculate the theoretical steady-state error and compare your results. 3.

  • The step response of the system

    Calculate the step response of the system. i.e., calculate the output v2(t) when the input is a unit step function. Please see the attached file for detailed solution.

  • Fourier transform of both discrete and continous signals

    Use the MATLAB command conv to calculate the response of the system to a unit step input, x[n]=u[n]. Consider 0 =< n <= 20. Show what you type into the MATLAB command window and submit a plot of the output.

  • Control System MATLAB Script

    ,t); % calculate percent overshoot [ymax,tp]=max(y); yss=y(end); Po=(ymax-yss)/yss*100; end; % steady-state error ess=abs(y(end)-1); % plot the step response step(sys) grid on; disp(['The closed loop transfer

  • linear time-invariant continuous system and Matlab

    Use the MATLAB command conv to calculate the response of the system to a unit step input, x[n]=u[n]. Consider 0 <= n <= 20 . Show what you type into the MATLAB command window. Also, submit a plot of the output. Be sure to label your axes. 2.

  • transfer function and unit setp response

    Given the results of 12, and the knowledge that the Laplace transform of a unit step is 1/s, calculate the Laplace transform Vout(s) for Vin=unit step.

  • Control System Specifications and Response

    Sketch the Bode magnitude plot of the specification. Show the low and high frequency asymptotes and mid frequency gain. c. Calculate the time to peak.

  • Job costing system: Calculate operating income

    . ** Please see the attached file for the complete solution response ** This solution provides a detailed, step by step explanation of the given accounting problem.

View More Related Solutions