Under water air pocket as a lens

Related BrainMass Solutions

• Problem Set of Interference and Parallel Plates

  When f is negative, it means that the lens is a diverging lens, which is thinner in the middle than at the edges. A diverging lens forms an image on the same side as the object. So the object is 24 cm to the right of the lens.

• Ray Optics: Refraction through Plane surface and lens

  77703 Ray Optics: Refraction through Plane surface and lens (See attached file for full problem description) Please see the attachment Answer: The fish is in the water (denser medium) and hence the light coming out from the water air interface

• A new application of Newtons rings experiment

  Thus using equation (1) or (2) for Dark fringe or Bright fringe respectively we can estimate the thickness of a paper strip by means of sliding it under the Plano-Convex lens A new application of Newton's ring experiment is determined.

• Physical Optics

  Q: If you put a few drops of liquid in a cup of soap with a little water and shake it around, making a great froth of bubbles. After several seconds, the bubbles will begin to show bright rainbow color patterns.

• Microscopy: total magnification, depth of field

  One litre of water= 1 Kg ( as shown above) Therefore two litres of water= 2 Kg The total magnifications and depth of fields in microscopy is examined.

• Microbiology Questions

  Immersion oil has the same refractive index as the glass so light traveling up through the slide, the oil and the objective lens is not refracted again until it passes from the convex upper surface of the lens into the air above.

• Refraction, net magnification and internal reflection

  A ray of light passes between layers of material as shown. Find the minimum value for θ_2 and the corresponding value of θ_1 that will result in total internal reflection at the glass/air interface. See document attached for diagrams.

• Gas Laws Experiment

  The water plug should remain in place and not drain down onto the top of the wax plug. There should be an entrapped air pocket between the water plug and the wax plug. 11. Prepare three different water samples: a.

• Contact of Sphere and a Sphere Surface

  152785 Contact of Sphere and a Sphere Surface See the attached file. A spacer defines the air-gap distance between a lens and a flat surface. The corner of the spacer can be modeled as a circle with radius, r1.