Purchase Solution

Three Zones of a Single Phase Circuit

Not what you're looking for?

Ask Custom Question

Three zones of a single-phase circuit are identified in the figure attached. The zones are connected by two transformers T1 and T2, whose ratings are also shown in the same figure. Using base values of 20kVA and 115 volts in zone-3 calculate the per-unit impedances. Neglect the transformer winding resistances and the shunt admittance branches.

Attachments
Purchase this Solution
Solution Summary

This solution includes nine calculations and answer.

Solution Preview

Solution

VBase = 115 Volts, VABase = 20,000 VA
ZBase = (VBase)2/ VABase = (115)2/20,000 = 0.66 ...

Purchase this Solution
Free BrainMass Quizzes
Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

The Moon

Test your knowledge of moon phases and movement.

View More Free Quizzes
Related BrainMass Solutions

  • Calculate the Per-Unit Current and Load Current in Amperes

    32189 Calculate the Per-Unit Current and Load Current in Amperes Three zones of a single-phase circuit are identified in figure 3.10(a) {see the attachment}.

  • Calculate the Per-Unit Source Voltages

    32188 Calculate the Per-Unit Source Voltages Three zones of a single-phase circuit are identified in the attached figure 3.10(a) {see attachment}.

  • Star Delta transformation of balanced 3 phase load

    A single Y-connected load with impedances, given by {3} (15+j15)||(15+j15)=(15+j15)/2=(7.5+j7.5)Ω The total power consumed in case (a) above if the line voltage of the three-phase supply is 415 V at 50 Hz

  • General Electrical Engineering Questions

    A single phase transformer has the following rating: 120 kVA, 2000 V/100 V, 60 Hz with 1000 primary turns.

  • Power factor

    147212 Power factor in AC circuit A single phase electric motor has an output power of 10 kW and an efficiency of 90% at full load. The motor is fed from a 240 V supply via a cable that has a resistance of 10 milli ohms per metre length.

  • Saturated and unsaturated synchronous reactance

    137037 Saturated and unsaturated synchronous reactance The following readings are taken from the results of an open- and a short-circuit test on a 9375-kVA three-phase Y-connected 13,800- V (line-to-line) two-pole 60-Hz turbine generator driven at synchronous

  • Three phase delta circuit

    72612 Three phase delta circuit A 2400V balanced, three phase delta circuit (see attached) has phase load impedances of 40+j60 OHMS. What are IaA, IbB, and IcC?

  • Fault Currents and Three Phase Faults

    So, the three-phase short circuit at bus 2 is Ia1 = -j 6.5 p.u. The solution looks at how to find the fault currents for a line to ground fault and a three-phase fault.

  • AC-LCR Circuits: Inductance, Capacitance and Frequency

    Moreover, the current in such circuit is not changing with the voltage in the same fashion and we call that they are not in the same phase, having a phase difference .

View More Related Solutions