Purchase Solution

Real Op Amp

Not what you're looking for?

Ask Custom Question

6. A real op amp is modeled by an ideal op amp, input bias current sources and an input offset voltage source.
Given V10 = 10 mV, Ib1 = Ib2=Ib= 100 nA and R= 100 kilo-ohms
a. Derive an expression for Vout as a function of V1 and V2.
b. What is the value of the output voltage, Vout if both V1 and V2 are set to zero.

See attachment for circuit diagram.

Attachments
Purchase this Solution
Solution Summary

This solution explains what assumptions are associated with an idea op-amp and derives the expression for Vout and also calculates the value of the output voltages. All workings and formulas are shown.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Looking at feedback and some Opamp problems

    For the ideal op-amp the slew rate is infinity but for a practical op-amp like the 741 it is around 0.5V/us. Temperature dependent effects make a real op-amp like the 741 depart from ideal behavior.

  • Analysing negative feedback for different Opamp types

    We can analyze the ideal op-amp for the non inverting case with negative feedback.

  • Operation Amplifiers

    Due to the real world device having material imperfections and operation limitations, the practical model of an op-amp consists of very high input impedance (hundreds of kilo ohms to more than a million), very high open-loop gain (tens of thousands to

  • Current in Op-Amp circuit

    5470 Find current for the op-amp circuit. Find current "i" for the op-amp circuit shown in the attachment, assuming an ideal Op Amp (operational amplifier).

  • Determining the transfer function of a op-amp with feedback

    Thus I0 = {0 - V0}/Z0 = - V0/Z0 (7) The second assumption that we use for the ideal op-amp is that the ideal op-amp draws no current.

  • Describe the characteristics of op-amp circuit

    The expert describes the characteristics of op-amp circuits. BJT op-omp and BiCMOS op-amp is compared.

  • Op-Amp Circuit

    5482 Find V for the op-amp circuit shown assuming an ideal Op Amp. Find v for the op-amp circuit shown assuming an ideal Op Amp. See attached file for full problem description. Please see the attached file.

  • Operational Amplifier Stability and Compensation

    a) Explain what is meant by 'unconditional stability' in an op-amp. b) Figure 2 gives the open-loop response of an uncompensated op-amp. Compensation is to be applied to the amplifier to make it unconditionally stable.

  • Op Amps

    In theory, input of the op-amp does not allow input current but in practice, small bias currents on the differential inputs enter the op-amp.

View More Related Solutions