Determine the Thermal Efficiency

Related BrainMass Solutions

• Determine the Thermal Efficiency

  37273 Determine the Thermal Efficiency A turboprop producing 1000 kW drives a propeller operating at 85% propulsive efficiency. If the fuel flow to the engine is 0.07 kg/s, determine the overall thermal efficiency of the engine.

• Turbine Thermal Efficiency

  This solution is comprised of a detailed explanation of how to determine turbine thermal efficiency.

• The DC input power, heat generation and maximum thermal resistance of class A and B amplifiers are calculated, and the resulting numbers indicate that a Class A amplifier is an enormous power waster in comparison to a class B amplifier.

  As the efficiency equals the AC output power from the amplifier divided by DC power supplied to the amplifier, we can now determine the DC power delivered: Class A: 200 W / 0.25 = 800 W Class B: 200 W / 0.785 = 254.8 W These numbers indicate

• Length of stroke, cylinder bore, clearance volume, thermal efficiency

  Determine: (a) the length of stroke (b) the cylinder bore (c) the clearance volume per cylinder in cm^3 (d) the thermal efficiency Answer: CR = (CV + SV) / CV SV= Swept volume CV= Clearance Valoume CR= Compression Ration ( C)____________

• A gas turbine takes in air at 300 K and discharges it to the

  The thermal efficiency of the turbine Theoretical power required for combustion process: The thermal efficiency is the net work of the process divided by the negative heat (see reference). So the thermal efficiency is d.

• Rankine Cycles

  The remainder is reheated to 400 C at this pressure which flows to the low pressure turbine stage. The condenser saturation pressure is 10 Kpa. Determine the thermal efficiency of the cycle and the net specific work.

• A heat engine is operating on a Carnot cycle

  Determine a) the power output of the engine and b) the temperature of the source. Please see the attached file. Solution: a.

• The compression ratio of an air-standard Otto cycle is 9.5

  The net heat transfer is 3. The thermal efficiency from definition: Using constant specific heat value at room temperature, the efficiency should be: 4.

• Rankine Cycle

  Determine: (a) thermal efficiency of the cycle (b) second law effectiveness I assume Boiler Feed Water ( BFW ) is at 1 bara and 25 degrees C. Let's call this state 1.