Current, magnitude

Related BrainMass Solutions

• Phasor Diagram for Synchronous Generator

  The magnitude of direct-axis armature current is thus: Id = Ia cos ? = 0.673 Ia The magnitude of quadrature-axis armature current is thus: Iq = Ia sin ?

• The Magnitude and Direction of Magnetic Fields

  Each wire carries a current of 1A toward the north. A) Find the magnitude and direction of the magnetic field at point P. B) Repeat the question if the current in the wire on the east side runs toward the south instead.

• Impedance: Sketch a circuit and phasor diagram; mangnitude of voltage, impedance; power supplied, total current

  : So the voltage across the resistor is: The magnitude of the voltage across the inductor is: Since the magnitude of the capacitor reactance is the same as the inductor capacitance, the magnitude of the voltage across the capacitor

• Charge, Current, Potential Difference

  100818 Charge, Current, Potential Difference In the attached circuit diagram: 1) Find the magnitude of the charge in the upper branch. 2) Find the magnitude of the current in the middle branch. 3) Find the magnitude of the current in the lower

• Magnetic Force

  15804 Magnetic Force A wire 2.80 m in length carries a current of 5.00 A in a region where a uniform magnetic field has a magnitude of 0.390 T.

• Magnetic field of two parallel wires with opposite current

  50738 Two parallel wires, each carrying a current of I = 3.1 A, are shown below, where d = 5.2 cm. The current in wire 1 is in the opposite direction of wire 2. Find the direction and magnitude of the net magnetic field at points A, B, and C. 1.

• Electromagnetic Theory: Magnitude and direction of force

  Magnitude and direction of force acting on a current carrying wire is calculated and explained.

• Find current and voltage in a series circuit

  The current in the circuit and magnitude of voltage drop across one of the resistor are found.

• Electromagnetism: Magnetic force on wire carrying current

  Calculate the magnitude of the magnetic force exerted on a 258 m length of wire if the current in the wire flows horizontally toward the east.

• Current in a solenoid

  This solution calculates the current required in a long solenoid to produce a magnetic field with a given magnitude.