Purchase Solution

Circuit voltage

Not what you're looking for?

Ask Custom Question

A circuit has two components connected in series as shown below; using phasors to represent the voltages and currents, as appropriate

a) Determine the unknown voltage V
b) What is the value of the unknown voltage, V, if the original voltage Vs is multiplied by the factor: 2∟90º

Please see the attached.

Attachments
Purchase this Solution
Solution Summary

This shows how to determine voltage with a given circuit.

Purchase this Solution
Free BrainMass Quizzes
Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

The Moon

Test your knowledge of moon phases and movement.

Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

View More Free Quizzes
Related BrainMass Solutions

  • Electrical circuit analysis

    The voltage of the voltage source and the equivalent impedance are to be determined as follows : i) to determine the voltage of the voltage source, we open the terminals and determine the open circuit voltage across the terminals.

  • Thevinin Equivalent to Work out max Power

    Could I please get someone to write down the equation for working out the ZTH(Thevinin equivalent load for this circuit) also could you find Vab1 is the voltage of the circuit using the voltage source and open circuit current source and applying the voltage

  • LCR Circuit - finding currents and voltage

    The expert finds currents and voltage for an LCR circuit.

  • Graph source and load voltage of a circuit

    128192 Graph Source and Load Voltage of a Circuit Consider the following circuit. The sinusoidal source voltage is vs(t) = 20 * sin(2*pi*t). The diode is ideal.

  • Potential divider and its Thevenin's circuit.

    (b) Determine Thevenin's circuit for the circuit of (a) (a) The potential divider supply circuit is shown in the diagram. For any load RL connected parallel to R2 the current and hence the voltage across R2 will decrease.

  • Series and Parallel Circuits Analogy

    Part II: Parallel Circuit F. Voltage across one Battery __________Volts G. Voltage across the circuit (three batteries) ___________Volts H. Current across the circuit (three batteries) ____________Amps I.

  • RL circuit

    53196 Given an RL circuit, find the rms voltage and current. 7. An RL circuit consists of a resistor R = 63 ohms , an inductor, L = 45 mH, and an ac generator with a rms voltage of 120 V.

  • Thevenins Therom

    (b) Replace the load circuit with an imaginary ohm meter and measure the total resistance, R, "looking back" into the circuit. This is RTh. The equivalent circuit is a voltage source with voltage VTh in series with a resistance RTh.

  • Multisim Circuit

    Solution: Below is the circuit of the simple voltage comparator circuit: Explanation: The main component used is the LM339 IC, which functions as a comparator. V_SOURCE represents the source signal voltage from the fuel level unit.

  • AC-LCR Circuits: Inductance, Capacitance and Frequency

    For the same voltage the current is given by where f is the face different and Z is the impedance of the circuit. The impedance of the circuit is given by here XL and Xc are inductive and capacitive reactance.

View More Related Solutions