Explore BrainMass

Explore BrainMass

    Type I and Type II Errors

    Type I and Type II errors are measures which are directly linked with hypothesis testing and result from a researcher assessing the claim being tested inaccurately. These errors usually occur because the alpha level is either too high or too low. A researcher can never be 100% sure when rejecting or failing to reject a null hypothesis due to the possibility of an error.

    A Type I error takes place when a researcher rejects a null hypothesis which is actually true. Thus, the researcher should have failed to reject the null hypothesis. Type I errors are more common as the alpha value increases1.

    Conversely, a Type II error occurs when a researcher fails to reject the null hypothesis when in fact, the null hypothesis is not true. In this case, the assumption being made is that there is no difference between the different sample means when in reality there is.

    A Type I error is represented by the symbol alpha (α) and a Type II error by the letter beta (β). It is important to realize that in any test there is always the possibility of error. The larger the significance level is set to, the more likely the chance of error becomes. Generally the significance level is set at 5% and this represents a way of controlling for the chance of a Type I error. This level can be thought of as the largest probability a researcher will allow for a Type I error to occur and still reject the null hypothesis. 

    With a Type II error, generally a researcher will decide to continue conducting further studies. In the study of statistics, understanding both Type I and Type II errors is critical as they play an important part in designing the significance levels for hypothesis tests.




    1. Villanova University. (2014). The Concepts of Statistical Power and Effect Size. Retrieved from: http://www83.homepage.villanova.edu/richard.jacobs/EDU%208603/lessons/stastical%20power.html

    © BrainMass Inc. brainmass.com January 30, 2023, 7:56 pm ad1c9bdddf

    BrainMass Solutions Available for Instant Download

    Salmonella in Chicken: Type I and Type II errors

    The USDA limit for salmonella contamination for chicken is 20%. A meat inspector reports that the chick produced by a company exceeds the USDA limit. You perform a hypothesis test to determine whether the meat inspector's claim is true. When will a type I or Type II error occur? Which is more serious?

    Hypotheses testing for a pollutant in a river

    The mean level of pollutant in a river is known to be 1.1 mg/L with a standard deviation of 0.16 mg/L. a) let the random variable X represent the mean level of pollutant in the measurements from a random sample of 25 sites along the river. Write down the mean and standard deviation of X. After a chemical spill, the mean lev

    Perform a hypothesis testing for single mean using t distribution

    Willco is a manufacturer in a mature cyclical industry. During the most recent industry cycle, its net income averaged $30 million per year with a standard deviation of $10 million (n = 6 observations). Management claims that Willco's performance during the most recent cycle results from new approaches and that we can dismiss pr

    Hypothesis Testing Explanations

    Question 1 of 17 1.0 Points A field researcher is gathering data on the trunk diameters of mature pine and spruce trees in a certain area. The following are the results of his random sampling. Can he conclude, at the .10 level of significance, that the average trunk diameter of a pine tree is greater than the average diamete

    Hypothesis Testing Calculations

    I need help, with the problems below. 1 Explain Type I and Type II errors. Use an example if needed. 2 Explain a one-tailed and two-tailed test. Use an example if needed. 3 Define the following terms in your own words. • Null hypothesis • P-value • Critical value • Statistically significant 4 A homeow

    Find critical value and test statistic for some t test questions

    Question 1 A hypothesis test is to be performed for a population proportion. For the given sample data and null hypothesis, compute the value of the test statistic, z = p-p0/(squareroot)p0(1-p0)/n Out of 69 observations, 67% were successes. H0: p = 0.54. 1.291 2.167 0.008 1.723 Question 2

    Finding test statistics and critical values for one proportion z

    1. A hypothesis test is to be performed for a population proportion. For the given sample data and null hypothesis, compute the value of the test statistic, z = A drug company claims that over 90% of all physicians recommend their drug. 1200 physicians were asked if they recommend the drug to their patients. 46% said yes.

    Find critical value and test statistics for some t test questions

    1. Find the critical value and rejection region for the type of t-test with level of significance α and sample size n. Right-tailed test, α = 0.1, n = 21 t0 = 2.528; t > 2.528 t0 = 1.323; t > 1.323 t0 = 1.325; t > 1.325 t0 = 1.325; t < 1.325 4. Test the claim about the population mean μ at the level of significa

    Hypothesis Testing of Mean

    The charitable foundation for a large metropolitan hospital is conducting a study to characterize its donor base. In the past, most donations have come from relatively wealthy individuals; the average annual donor income in the most recent survey was right at $100,000. The foundation believes the average has now increased. A ran

    Significance of Correlation & Regression Analysis

    Use the Student_Data.xls file to solve the following. Problem 1) Does undergraduate success predict graduate success? While most people complete their bachelor's degree during the daytime while taking multiple classes and not working full-time, those getting an MBA are typically taking one or two courses at a time, in the

    Hypothesis Testing for Graded Assignment

    I'm not sure about the category but The questions are listed below.... Use the Student_Data.xls file to solve the following. For each problem, be sure to state the direction of the test used, the decision to reject the null or not, and the conclusion in English.: Problem 1) The battle of the sexes lives on still today.

    Conducting and analyzing data using descriptive statistics

    Complete the following: Use an existing dataset to compute a factorial ANOVA. All SPSS output should be pasted into your document. The "Activity 5a.sav" file contains a dataset of a researcher interested in finding the best way to educate elementary age children in mathematics. In particular, she thinks that 5th grade girls d

    Find the Correlation Coefficient and Slope

    A study was conducted to compare the average time spent in the lab each week versus course grade for computer students. The results are recorded in the table below. Find the value of the linear correlation coefficient r. Find the value of the linear correlation coefficient r. Compare the computed linear correlation coefficient

    Analyze the results of one-way ANOVA with given data

    In this problem set you will get some practice performing One-Way Analysis of Variance. Enjoy! Listed below are measured amounts of greenhouse gas emissions from cars in three different categories. The data are taken from the Car Measurements data set that can be found in the statdisk datasets for our textbook. The measur

    Statistics: Rejecting a Null Hypothesis

    Consider the following hypothesis test: H0: mean greater than or equal to 5 vs. H1: mean < 5. Suppose that you take a sample and conduct the test. You conclude that you can reject the null hypothesis. What can you say about the results of the hypothesis test: H0: mean = 5 vs. H1: mean not equal to 5 tested using the same

    Interpreting the Intercept and Slope of Regression Lines

    Old Faithful The time between eruptions of the Old Faithful geyser in Yellowstone National Park is random but is related to the duration of the previous eruption. In order to investigate this relationship you collect data on 21 eruptions. For each observed eruption, you write down its duration (call it DUR) and the waiting

    T-Test for Mean Lifetime of Lithium Batteries

    There will be at least one question of this type on my final exam tomorrow and I need a logical way to approach the solution. Question: A Manufacturer claims that the mean lifetime of its Lithium batteries is 1400 hours. A homeowner select s 25 of these batteries and finds the mean lifetime to be 1380 hours with a standard de

    Hypothesis Testing on Multiple Populations

    Dr. Michaella Evans, a statistics professor at the University of Maryland University College, drives from her home to the school every weekday. She has three options to drive there. She can take the Beltway, or she can take a main highway with some traffic lights, or she can take the back road, which has no traffic lights but is

    Discussion on some statistical terms: F-ratio, error variance

    What is an F-ratio? Define all the technical terms in your answer. What is error variance and how is it calculated? Why would anyone ever want more than two (2) levels of an independent variable? If you were doing a study to see if a treatment causes a significant effect, what would it mean if within groups variance was highe

    The disadvantages of within-subjects designs

    1. Chuck Wagon is very excited about the within-subjects approach. "Now I'll never need to run large numbers of subjects again," he says. However Chuck has forgotten that within-subjects designs may be a) useless, b) impossible, c) confounded by order effects, or d) impractical when excessive subject time spent in an experiment

    Null and Alternative Hypothesis, Type I and II error, T test for equal variances

    Exercise I The admissions counselors at Brainy University believe that the freshman class they have just recruited is the brightest yet. If they wanted to test this belief (that the freshman are brighter than the other classes, what would the null and alternative hypothesis be? To test the hypothesis in Exercise 1, the adm

    Brief answers on 25 statistical multiple choice questions

    The __________ is a hypothesis-testing procedure in which there are two separate groups of people tested and the population variance is not known. A.t test for dependent means B.t test for a single sample C.t test for independent means D.t test for repeated measures Question 2 of 25 1.0 Points Which of the

    Brief discussion on the application of type I error in our real life

    Someone tells you something and you need to decide if you should believe him or her. Are you more likely to be worried about committing a Type I error or a Type II error? Does it depend on the person? Would you react differently if the information was coming from your boss, your spouse, your child, your teacher, or a store

    Constructing a control chart using excel

    The funds-transfer department of a bank is concerned with turnaround time for investigations of funds-transfer payments. A payment may involve the bank as a remitter of funds, a beneficiary of funds, or an intermediary in the payment. An investigation is initiated by a payment inquiry or a query by a party involved in the paymen

    SPSS: comparing two means

    Statistical Significance and Effect Size a. Testing a Hypothesis: You previously assist me with a previous posting number 581870. Now this posted question is asking to rewrite your research question, null hypothesis, and alternative hypothesis from posting 581870. Make any needed improvements to create an appropriate hypothes

    Solving Some Questions on Descriptive Statistics

    There is a new drug that is used to treat leukemia. The following data represents the remission time in weeks for a random sample of 21 patients using the drug. It is problem 1 on the spread sheet

    Statistical power and sample size (n)

    Statistical Power Read the following scenario and explain what power issues may arise. What factors influence statistical power? A researcher is interested in investigating how teaching style (structured vs. unstructured) affects learning of vocabulary in children who are developmentally delayed, typically developing and g

    Hypothesis Testing of Sprinklers

    I need some help reviewing the sample problem below: Sprinkler Systems. A manufacturer of sprinkler systems designed for fire protection claims that the average activating temperature is at least 135 degrees F. To test this claim, you randomly select a sample of 32 systems and find the mean activation temperature between 133

    Hypothesis Testing & Confidence Interval for Cavity Prevelance

    The producers of a new toothpaste claim that it prevents more cavities than other brands of toothepaste. A random of 60 people used the new toothpaste for 6 months. The mean number of cavities at their next check up is 1.5. In the general population, the mean number of cavities at a 6 month checkup is 1.73 (population mean = 1.1

    Explaining the Z test for proportion

    A researcher believes that the percentage of people who exercise in California is greater than the national exercise rate. The national rate is 20%. The researcher gathers a random sample of 120 individuals who lives in CA and finds that the number who exercises regularly is 31 out of 120. a. What is X2 obt? b. What is the df