Purchase Solution

Fluid Pressure and force.

Not what you're looking for?

Ask Custom Question

A 2.28 N force is applied to the plunger of a hypodermic needle. If the diameter of the plunger is 1.14 cm and that of the needle 0.215 mm, with what force does the fluid leave the needle?

Purchase this Solution
Solution Summary

The fluid is pressed in a needle with a force on the plunger. The force on the fluid in the needle is calculated.

Solution Preview

Please see the attached file.

A 2.28 N force is applied to the plunger of a hypodermic needle. If the diameter of the plunger is 1.14 cm and that of the needle 0.215 mm, with what force does the fluid leave the needle?

Answer:

As nothing is said about the nature of ...

Purchase this Solution
Free BrainMass Quizzes
Intro to the Physics Waves

Some short-answer questions involving the basic vocabulary of string, sound, and water waves.

The Moon

Test your knowledge of moon phases and movement.

Basic Physics

This quiz will test your knowledge about basic Physics.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

View More Free Quizzes
Related BrainMass Solutions

  • Density and Rock

    A fluid or gas is constantly exerting pressure on any object that is submerged inside of that fluid / gas. This "pressure" tries to force the object upwards due to the displaced volume of fluid that occurs from the submerged object.

  • Derive from first principles the Poiseuille equation

    The net force pushing the fluid is FP =p1πr2 - p2πr2 = πr2(p1 - p2) Note that the force inducing the motion of the fluid is the difference or gradient in pressure and does not depend upon the absolute magnitude of the pressure itself

  • Pressure in a Centrifuge

    The pressure in the fluid at a distance from the axis of rotation is . A. What is the pressure of the fluid in the test tube at an arbitrary distance from the axis of rotation?

  • Hydrostatic Pressure and Forces

    This solution contains an annotated force body diagram and shows step-by-step calculations and explanations to determine the force due to the hydrostatic pressure using fluid density and width.

  • Mechanical physics: Fluid pressure and string tension

    If the diameter of the plunger is 1.3 cm and that of the needle 0.20mm, (a) with what force does the fluid leave the needle? (b) What force on the plunger would be needed to push fluid into a vein where the gauge pressure is 75 mm-Hg?

  • Viscous Effects: Fluid Resistance

    7521 Viscous Effects: Fluid Resistance Determine the force on the piston of Fig. 5.42a due to shear and the leakage from the pressure chamber for U=0. It is easier to first calculate the leakage from the pressure chamber.

  • Elastic Moduli and Pascal's Principle and Fluid Dynamics

    101836 Elastic Moduli and Pascal's Principle and Fluid Dynamics Question 1: A bimetallic rod is composed of brass and copper. a. If the rod is subjected to a compressive force, will the rod bend toward the brass or the copper? Why? b.

  • The Pressure on A2 in PSI

    447647 The Pressure on A2 in PSI Two pistons push down on the fluid filling two cylinders connected by a narrow hose, as shown in the figure. The area A1 is 1 square inch, and the area A2 is 10 square inches.

  • Designing a hydraulic system

    It must be able to lift a load of 3.0 metric tons using an input force of no more than 100 N. The pressure of the hydraulic fluid in the system must not exceed 10.0 bar during this lift.

View More Related Solutions