Explore BrainMass

Explore BrainMass

    Experiment Design

    Physics experiments can range from a simple tossing of a ball to experiments on Bose-Einstein Condensate. The field of physics is vast with a wide range of different research occurring. Regardless of the level of experiment that occurs, the scientific method needs to be followed. This method has been followed for thousands of years. It relied on the principle that science builds on previous knowledge to improve the understanding of the world. The scientific method is as followed:

    Formulation of a question – This involves researching previous evidence from other scientists, if the answer is already known a different question that builds on the previously found information can be posed.

    Hypothesis – A conjecture based on the knowledge obtained while formulating the question.

    Prediction – Determining the logical consequences of the hypothesis. The less likely the prediction would be correct, the stronger the evidence it would be if the prediction were fulfilled. Evidence is also stronger if the answer to the prediction is not already known. The prediction must distinguish the hypothesis from likely alternatives.

    Testing – The investigation of whether the real world behaves as the predicted hypothesis states. This occurs by conducting experiments. If the experimental findings agree with the hypothesis, the confidence in the hypothesis increases. Although, agreement does not assure the hypothesis is true.

    Analysis – Analysis involves determining what the result of the experiment shows. From the analysis, other actions may be taken regarding formulating a more complete answer. The prediction of the hypothesis is compared to determine which is better able to explain the data collected. At this stage, the experiment is either finished or goes back to formulating a new question.

    For some complex experiments, the scientific method is a cyclic process which can have several iterations. The goal is the gain knowledge in the form of a testable explanation that can predict the results of future experiments.

    © BrainMass Inc. brainmass.com September 27, 2022, 9:39 am ad1c9bdddf


    BrainMass Categories within Experiment Design


    Solutions: 1

    The prediction of the future event based of measurements already made.


    Solutions: 6

    The difference between computed, measured or estimated values and the accepted true value.

    Lab Write-Ups

    Solutions: 3

    A written presentation of the experimental findings.


    Solutions: 5

    A determination of the quality of work.


    BrainMass Solutions Available for Instant Download

    Deciding Between Evolution and Creationism

    Since science does not prove anything, neither the theories of evolution nor creationism are proven. Discoveries often presented as evidence are in fact just observations that did not disprove the theories or the hypotheses formulated based on the theories. How do I decide between these two theories? If you include references wi

    Physics: Light and Shadow

    Two small bulbs are held one above the other. The top bulb is red; the bottom bulb, green. A small ball is held between the bulbs and a white screen. ** Please see the attached file ** You don't need to sketch it like it says in the problem, just explain.

    Pressure at knee joint experiment

    Please see the attached. If the attached drawing represented a very crude design of a theoretical and artifical leg ---- and if I know the force applied is 100 kg, how would I go about calculating the pressure applied to the knee joint and foot that I show. I have not provided a dimension for the knee joint but could I ass

    Bouncing particle quantities

    (a) Construct quantities having the dimensions of energy and of length when the potential energy is V(z) = mgz for z > 0 and V(z) = 1 for z < 0. (b) An electron bounces on a horizontal surface. In its lowest energy states, the electron stays near the surface, held there by gravity. Show that the minimum thickness of the layer

    Explanations to the lab questions on laws of motion.

    I have attached my lab and data sheets. I need questions at the end of the lab (1, 2, 5, 6) answered and the free body diagram drawn with all symbols and which way the acceleration points. Please give any explanations. See attached file for full problem description.

    Solving for Significant Figures

    Please provide assistance with the following questions: Which of the following has three significant figures? a. 1.00081 kg b. 8.060 x 1011 m c. 0.0500 mm d. 305.0 cm (I think the correct answer is d) Express 0.0015671 to three significant figures. a. 0.002 b. 0.0016 c. 0.00156 d. 0.00157 (I think the correct

    Spring System Graphing

    Excel Spreadsheet Problem A mass M is connected to the end of a spring with mass m and force constant k. The mass of the spring is 7.40 g. When the mass/spring system is set into simple harmonic motion, the period of its motion is T = 2*PI*SQRT((M + (m/3))/K) Part 1: A two-part experiment is conducted with use of var

    Atwood Machine

    In an atwood machine experiment, the larger mass is 1.8kg and the smaller mass is 1.2kg. Ignoring friction, the acceleration of masses when released from rest is?

    Projectile Motion Experiment

    In a projectile motion experiment, if you wanted to plot the range R versus a quantity that depends on angle (that is, you are going to vary the angle) and that would result in a straight line, what would you choose for the independent function variable (function variable plotted along the horizontal axis)? Explain.

    The Coefficient of Static Friction

    Place a coin at one edge of a textbook and slowly lift the book. When the coin just starts to slip down the incline, measure the angle (theta). Find Ff = m*g*sin(theta) and N = m*g*cos(theta). Do I need to know the mass of the coin(m), gravity(g), and the angle(theta) the flate surface makes with the table?

    Experiment with colors

    21. When green glass is placed between the flashlight and the white movie screen (see attached diagram), a green spot appears on the screen. If green glass and red glass are placed between the flashlight and the movie screen (as shown on the right below), what will happen to the spot? (a) It will be green. (b) It will be

    Newton's Third Law: To make a balloon in a jet balloon lab make a return trip

    I take principles of Physics and for the last two days I have been trying to do a lab where I have to develop a design with 6 yards of strings conected to two poles and pulled taught, as many balloons as necessary, straws, tape, and paper clips. The set up of the lab is a string stretched taught across the room in the first lab