Transistor by connecting two diodes back to back

Related BrainMass Solutions

• Power supplies regulated & unregulated problems and solutions

  Conventional current flows through D_1 the load and through D_3 back to the secondary coil as shown by the arrows.

• Different Logic family Gates

  (3) Diode-Transistor Logic (DTL) By letting diodes perform the logical AND or OR function and then amplifying the result with a transistor, we can avoid some of the limitations of RTL.

• Semiconductors

  Diodes and transistors are two of the most commonly used semiconductor devices. Diodes are two-layered semiconductor device, which is composed of 1 N-type material and 1 P-type material.

• Diodes, transistors (including BJT) and current mirrors

  The mutual transconductance β and α are related in each other by the following formula: The solution discusses diodes, transistors (including BJT) and current mirrors.

• Theveninization of a transistor circuit

  To get the thevenin equivalent of everything connected to the base of the transistor, find the voltage looking back towards the base node. That's the thevenin voltage Vt.

• Full Wave Center Tap Bridge Rectifier

  This solution provides an explanation for finding Voltage using transform factor and reference to diodes and capacitors.

• Desiging a battery charger

  We need a high output to switch on the npn transistor.
  Vin and the voltage across the zener diode serves as two voltage sources for comparison.

• Diodes and Path of Current

  71562 Diodes and Path of Current Sketch the path of the current through the diodes when the voltage is as given for the two cases shown (see attached file for full problem description).

• Understanding capacitors and inductors

  Inductors are used in tuned circuits with capacitors to provide frequency selection, as in a radio. They ae also used to reject a particular frequency. In AC circuits, inductors can be used as chokes by connecting them in series 6.