Explore BrainMass

# Electric Power

Electric power is the rate at which electric energy is transferred by an electric circuit. The SI unit of power is a watt, or a joule per second.

Electric power is generally produced by electric generators but can also be supplied by chemical sources such as electric batteries. It is typically supplied to businesses and homes by the electric power industry. It is usually sold by a kilowatt hour. This is the product of power in kilowatt multiplied by the running time in hours.

Electric power is the rate of doing work. It is represented by the letter P. The electric power in watts produced by an electric current/consisting of a charge of Q coulombs every t seconds passing through an electric potential difference of V is

P = work done per unit time = QV/t = IV

Where

Q is electric charge in coulombs

t is time in seconds

I is electric current in amperes

V is the electric potential or voltage in volts.

Electric power is transformed to other forms of power when electric charges move through an electric potential difference; this happens from a high voltage to a low voltage. The potential does work on the charges, converting the energy in the potential to kinetic energy of the charges, or some other form. This process occurs in most electrical appliances such as light bulbs, electric motors, and heaters.

### Calculating the potential of a spherical shell

I am working through this problem and part A is easy enough to show but part b and c have me wondering if I am on the right path. For part b-- I get the point p = r' sin(theta) - r Then dV = k*sigma * 2 * pi * r' ^2 cos(theta) d(theta)/ (r'^2 + r^2 - 2 r r' sin(theta))^(1/2)

### Electric field/binomial expansion?

Show that, for points that are far from a hoop of charge q and radius r, the electric field looks like a point charge. Show this using a diagram and use binomial expansion. I'm not sure if I am setting this up correctly, and I really need help on the binomial expansion. Thank you.

### Solving electrical circuits using Superposition.

Please see attached picture and solve all parts using superposition only. Find the power dissipated or absorbed by the voltage source V2. Does V2 release or absorb power? Please refer to the attachment.

### Evaluating an Electric Field

Question: A small helium-neon laser emits red visible light with a power of 3.20mW in a beam that has a diameter of 2.50mm. (a) What are the amplitude of the electric and magnetic fields of the light? (b) What are the average energy densities associated with the electric field and with the magnetic field? (c) What is the

### Waveguides & Cut-off Frequency Examples

Explain what a waveguide is, the cut-off frequency and give examples in everyday use.

### Physics: Magnetic & Induction

See attached document for questions. Magnetics & Induction 4a1. Find the direction and magnitude of force exerted on an electron with initial velocity (= 100 m/s) along +x axis, if o the magnetic field (2 T) is pointing at +30 angle from +X axis, in the XY plane. -19 Hint: F = (-1.6x10 C)(100 m/s

### Sample Physics Questions

See file for diagram. 1. Four long parallel wires each carry a 2.0 A current in the same direction. The wires are parallel to the z-axis, and they pass through the corners of a square of side 5.0 cm positioned in the x-y plane as shown in the diagram. a) What is the magnitude of the magnetic field at the center of the square

### Potential difference, Electric field, Equivalent resistance

Please give detailed and clearly explained answers. 1. A uniform electric field E of magnitude 235 N/C is directed in the negative x direction in the Figure 1 in the attachment. The coordinate of point A are (-0.2, -0.3) m, those of point B are (0.4, 0.5) m and those of point C are (-0.2, 0.5) m. (a) Calculate the potentia

### Basic Electric Science Questions and Solutions

A number of questions pertaining to parallel plate capacitors are presented and solutions showing how to determine the Electric Field strength, Charge per unit area and other parameters such as charged stored are presented. The second part of the exercise shows how to determine which bulbs light in a series parallel circuit w

### Tension in cord, Period of vibration, Resistance, Force between charges

I have an exam coming soon and trying to revise previous papers. Can you solve the questions in the attachment and show me how to reach the correct answer? Please remember to keep track of significant figures and units. Some of the questions from attachment are listed below to give you some idea about the kind of questions. P

### Physics: Electric car KW hours, solar panel efficiency,

1) Kilowatt-hours needed to run an electric car (95% efficiency motor) equivalent to 5 gallons of gasoline (130,000 BTU/gallon) (20 miles/gallon = 100 miles) 2) Square meters of solar panel (8% efficiency) needed to provide 25 KWH/day in Michigan (sun=1380 watts/sq. meter of energy), wintertime (10 hours of light), cloudy day

### Distance at which 75W bulb will have the same brightness

At what distance will a 75 W light bulb have the same apparent brightness as a 100 W bulb viewed from a distance of 24.7 m? (Assume that both bulbs convert electrical power to light with the same efficiency.) Please solve and explain problem.

### Physics: Turning on the lights

Please help with the following problem. You have two different light bulbs (60 W and 100 W). You are going to plug them into a circuit in your house, using an electrical outlet in the wall to supply the voltage. Which of the following statements are true? (T/F) if the two bulbs are in series, the total power of the combi

### An immersion heater

An immersion heater used to boil water for a single cup of tea plugs into a 120V outlet and is rated at 300W. What is the resistance of the heater? Suppose your super0sive, super-insulated tea mug contains 400g of water at a temp of 18 degrees Celsius. How long will this heater take to bring the water to a boil? Ignore t

### Physics: Miscellaneous Questions

2. A 240V mains supply is used for lighting a room. In the room there are 3 lights, of power rating 30W, 50W and 100W. a) Draw a diagram of the circuit. b) What is the total voltage, current and power supplied by the mains supply? 3. A person touches a bare electrical wire at 500V whilst repairing a power supply.

### Solar Energy Produced

The Sun produces a tremendous amount of energy and will for the next 5 billion years, should we concentrate on capturing this energy by solar cells and wind turbines, rather than depend on oil which will run out shortly or nuclear power of which we cannot control the waste products.

### Unusual expansion of water, bimetalic strip, gaps in railway lines

1. Explain what you mean by unusual expansion of liquid (water) 2. Explain how a bimetalic strip is used in an electric iron and explain how it helps to control the temperature of iron. 3. Thermal expansion can be a problem, small gaps are left in railway lines and in bridges, explain in detail why the gaps are needed.

### Determining Torque and Power: Ferris Wheel Example

An electric motor can accelerate a Ferris wheel of moment of inertia l = 22000 kg m^2 from rest to 11.0 rev/min in 12.0 s. When the motor is turned off, friction causes the wheel to slow down from 11.0 to 9.0 rev/min in 10.0s. a) Determine the torque generated by the motor to bring the wheel to 11.0 rev/min. b) Determine

### Light, Frequency, Voltage and Current

1. Which is a correct statement? A. Visible light has a frequency of 10 to the power of 14 Hz. B. Gamma rays have a frequency of 60 Hz. C. A microwave oven produces EMG of approximately 10 to the power of 9 Hz. D. High voltage electric power lines produce EMF of 80 Hz. 2. An office worker wants to plug in a 30

### Verify that the Electric Field Satisfies a Given Wave Equation

The full question is attached. It asks me to verify that the electric field satisfies a given wave equation and that the electric and magnetic fields satisfy Faraday's law. It goes on to ask me to state the boundary conditions of the electric and magnetic fields. It also asks me to calculate the Poynting vector.

### Important information about Heat Pump

Hello See attached file. Thank you so much! Bye

### Lightning Rods and Household Electrical Circuits

4) a) What is the purpose of the lightning rod and how does it work? b) Why is the car interior a safe place to be during a thunderstorm? Explain. 5) a) In a typical household electrical circuit are the appliances connected in series or in parallel? Why? Explain. b) What are the purpose and role of a circuit breaker in a hou

### Show that the field inside a spherical cavity cut in a uniform dielectric medium is uniform and of magnitude Ecav = 3erEm/(2Er+1), where er is the relative permittivity of the medium and Em is the uniform field in the dielectric at a point distant from the cavity.

Show that the field inside a spherical cavity cut in a uniform dielectric medium is uniform and of magnitude Ecav = 3erEm/(2Er+1), where er is the relative permittivity of the medium and Em is the uniform field in the dielectric at a point distant from the cavity.

### What is the wavelength in meters of radio waves produced by a radio station with a frequency of 1400 kHz?

1. What is the wavelength in meters of radio waves produced by a radio station with a frequency of 1400 kHz? 2. A series of ocean waves, each 6.0 m from crest to crest, moving past an observer at a rate of 2.0 waves per second, has what speed? 3. What are the wavelength limits in meters of the audible region of the sound

### Energy problem

You have been appointed as an advisor to recommend on the type and location of the new power stations. After extensive research you concluded that by 2025: -The total installed electric capacity must be 90 GW (This includes a 15% spare capacity) -20% of electricity will come from renewable sources (25 % Wind and 75 % Solar T

### Electrical circuits and current: Kirchoff's laws

In the circuit in Doc 5. - Please find the current in each resistor and the power supplied by each source of EMF

### Electricity Fraction for Total United States Rates

What fraction of the total rate of U.S. electricity production in 1980 does 2.67 x 10^8 W correspond to? Here are some facts that go along with the problem: Since there are 3.15 x 10^7 seconds in a year, electric energy would be produced at 2.67 x 10^8 W. This is roughly 1/4 the power output from 1 typical, modern, nuclear, or

### Converting Electrical Energy

For a computer, we are given: Average power consumption=600W source =120V computer is operated for 3 hrs a day. Q: How much electrical energy is converted to other forms of energy in 1 day?

### Determining Cost of Running a Furnace: Example Problem

An electric furnace runs nine hours a day to heat a house during January (31 days). The heating element has a resistance of 5.3 ohms and carries a current of 25 A. The cost of electricity is \$0.10/kWh. What is the cost of running the furnace for the month of January?

### Physics Questions

1. A freezer has a coefficient of performance of 2.40 and can convert 1.80 kg of water at 25 degree C to ice at -5 degree c in 1 hr. a. The heat removed per hour is ------------ and b. The electrical energy consumed per hour is--------- 2. Divers are sealed in deep-dive research vessel on the deck of the mother ship a