Problem involves a seal-in circuit with an internal relay control. Please see attached for description.
I'd like to see the ladder logic diagram as to how the problems are to be diagramed. I had only two lines of ladder logic for part a, but I think there may be more. Can anyone give me a firm understanding on this?
See attachment for TriLogi files and a Word document with an explanation which has been pasted below:
Please refer to the Trilogi ladder logic file for the actual logic.
Initially, both cylinders will be retracted, and thus Pr_3 will be one, while both Pr_1 and Pr_2 will be off.
Note about the cylinders. They are adjustable because the air pressure extending the cylinders can be changed via a valve. The PLC code has nothing to do with this. They retract at a constant speed because once the air is shut off, the internal mechanism of the cylinder will retract unassisted.
Rung 1 is to turn the ...
The solution provides a thorough written explantion to accompany the two Trilogi ladder logic files requested concerning a seal-in circuit problem featuring an internal relay control.