Alternating currents - Phase angle, current, capacitance, and voltage

Related BrainMass Solutions

• Compound Angle Formula : Current, Voltage and Phase Angle

  64244 Compound Angle Formula : Current, Voltage and Phase Angle 1. Alternating currents are given by: and By making use of the Compound Angle Formulae determine: a. The maximum value of the resultant current b.

• AC-LCR Circuits: Inductance, Capacitance and Frequency

  what is the phase angle at f=250Hz ---------------------------------------- In an alternating current source the emf of the source is changing Periodically (sinosudaly) and hence the current is also varying.

• Capacity of Current in Alternating Currents

  33725 Capacity of Current in Alternating Currents Question: A series RLC circuit is driven at a frequency of 500 Hz. The phase angle between the applied voltage and current is determined from an oscilloscope from measurement to be delta =75 degrees.

• AC Circuits

  Complex forms of Ohm's law for alternating current is examined.

• General Electrical Engineering Questions

  An a.c. voltage, V, comprises of a fundamental voltage of 100 V rms at a frequency of 120 Hz, a 3rd harmonic which is 20% of the fundamental, a 5th harmonic which is 10% of the fundamental and at a phase angle of 1.2 radians lagging.

• LCR Circuit - finding currents and voltage

  The expert finds currents and voltage for an LCR circuit.

• Reducing power losses in transmission of alternating currents.

  The same equations will also holds with the rms (root mean square) values of the current and voltages and the impedance for alternating currents with a power factor cos , where  is the phase difference between the current and voltage.

• Phasor Diagram for Synchronous Generator

  wt kA; the currents and voltages are balanced at three-phase.

• impedance, capacitance, and indcutance

  The phase angle of an RLC series circuit with an inductive reactance of 200 ohms, a resistor of 200 ohms and a certain capacitor at 1000 Ha is 40.0 degrees. What is the value of the capacitance in this circuit? 4.