Purchase Solution

Terminal Voltage & Power Supplied/Dissipated

Not what you're looking for?

Ask Custom Question

Refer to Figure 2.16 (see attached file):
a) Find the total power supplied by the ideal source.
b) Find the power dissipated and lost within the nonideal source.
c) What is the power supplied by the source to the circuit as modeled by the load resistance?
d) Plot the terminal voltage and power supplied to the circuit as a function of current.
Repeat I_T= 0,5,10,20,30 A.
V_S= 12 V and R_S= 0.3 Ohms

Attachments
Purchase this Solution
Solution Summary

Solution attaches a .doc file showing how to find total power supplied by an ideal source and lost by a nonidea one as well as power supplied by a modeled circuit and its terminal voltage as a function of current.

Solution Preview

Please see the attached file.

a) Find the total power supplied by the ideal source.
The ideal source means there is no lost in the source, i.e. . The total power is .
b) Find the power dissipated and lost ...

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • BJT suitability of transistor types simple circuit

    The collector Q point voltage is thus given by V_CQ=24-i_CQ R_C=24-0.02×560=12.8V Determine an equation defining the maximum power dissipated and work out the maximum power to be dissipated by the transistor for the particular case The power

  • Calculating the average power available with an AC source

    What is the average power supplied by the source?

  • Electric Circuits

    The power dissipated in a resistive circuit is given by V x I or I2 x R. a. In the above question, what is the power dissipated in the 50 ohm resistor? b. In the above question, what is the power supplied by the 10 volt battery?

  • Electric Circuits

    (a) Calculate the current supplied by the battery. (b) Calculate the terminal voltage, V. (c) Calculate the power dissipated within the battery (Pb = E * I) e2.

  • Solving for Power

    73353 Solving for Power If the voltage and current supplied to a circuit or load by a source are: Vs = 170<(-0.157) V Is = 13<0.28 A determine a) The power supplied by the source which is dissipated as heat or work in the circuit (load).

  • Power factor

    If the terminal voltage to the motor must not fall below 90% of the supply voltage, calculate the maximum return length of the cable for a motor power factor of: A. unity B. 0.8 (sketch a circuit diagram and phasor diagram, the motor and line voltages

  • Electronic Principles Questions

    Using Kirchhoff's voltage law and by writing the appropriate equations find: i. The currents i2 & i3. ii. The output voltage Vout. iii. The power dissipated by the zener diode (resistor RZ).

  • Current And Power Dissipation

    573922 Current And Power Dissipation Circuit is attached (a) Calculate the value of the current through the 12 V battery shown in FIGURE 3. (b) Calculate the power dissipated in R1, R2 and R.

  • Ohm's Law

    As voltage across R2 decreases, power dissipated in the same given by V2/R also decreases (Hence, d is correct).

View More Related Solutions