Purchase Solution

Maximum horizontal shear and bending stress

Not what you're looking for?

Ask Custom Question

See the attached file.
3. A 4 inch diameter solid circular shaft has a V-belt pulley attached to one end and is supported as shown below. The combined pulley weight and belt pull is 1000 lbs. Determine the magnitude and location of the:

(a) maximum horizontal shear stress
(b) maximum bending stress

Neglect the shaft weight.

Attachment has the drawing.

Attachments
Purchase this Solution
Solution Summary

This solution determines the magnitude and location of maximum horizontal shear stress and the maximum bending while neglecting the shaft weight.

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Shear force and bending moment diagrams, maximum bending stress

    287350 Shear force and bending moment diagrams, maximum bending stress See attached files. prob6.JPG Indicate negative and positive regions. Show values of shear and bending moments at points of interests (A,B,C,D,E).

  • Simple Beam Concentrated Load at a Point

    18738 Simple Beam Concentrated Load at a Point Draw the shear and bending moment diagram for the beam shown and find the value of the maximum bending stress. This case is a Simple Beam Concentrated Load at a Point.

  • Shear forces and bending moments

    (a) Calculate the maximum bending moment (b) Calculate the maximum stress in the beam (c) At the point of maximum stress sketch a graph of the stress distribution through the thickness of the beam, indicating which are tensile and compressive stresses

  • Determine the principal stresses and the maximum shear stress in a spindle

    from: Therefore maximum shear stresses = (((2.83 -2.83)/2)2 +15.12) = 15.1 N/mm The principal stresses and the maximum shear stress in a spindle is examined.

  • Stress Conditions, Etc.

    Determine :- (a) the magnitude and orientation of the principal stresses (b) the magnitude and orientation of the maximum shear stress the stresses acting on a plane whose normal makes angle of 30 clockwise from the x-axis Answer:

  • Exam sample question in Applied Mechanics

    It is also subjected to a bending moment of 9kN-m and to an end thrust. If the maximum principal stress is limited to 80MPa, determine the permissible end thrust.

  • Principle Stresses for Elements

    The value of maximum normal stress will be found using (8), (16) and applying the concentration factor (Kt): (17)  The maximum torsional shear stress occurs on the outer diameter too and can be computed

  • Shear Force and Bending

    This in-depth handwritten solution contains step-by-step calculations and explanations to determine the magnitude and direction of maximum shear force and maximum bending moment.

  • maximum allowable stress

    Hence determine the shear stress in the pulley shaft. given that it is in double shear Task 4 For the pulley arrangment in Task 3, determine the maximum tension T allowable in the cable, if the shear stress in the pulley shaft is to be kept to 100

View More Related Solutions