Purchase Solution

Hollow shaft transmitting power with shear limits.

Not what you're looking for?

Ask Custom Question

(a) Design a hollow steel shaft to transmit 300 hp at 75 rpm without exceeding a shear tress of 8000 psi. Use 1.2:1 as the ratio of the outside diameter to the inside diameter.
(b) What solid shaft could be used instead?

Purchase this Solution
Solution Summary

The hallow shaft transmitting power with shear limits are examined. The ratio of the outside diameter to the inside diameters are given.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Ideal solutions concerning rotating solid and hollow shafts

    Calculate the power delivered by a rotating hollow shaft with an outer diameter of 150mm, an inner diameter of 100mm, rotating at a speed of 3 rps for maximum Shear Stress of 50 MPa The important parameters to note here is that the shaft is hollow so

  • Steel Shaft Design

    This solution is comprised of a step by step explanation of torsional stress, torsional strain and relationship with modulus of rigidity & polar moment of inertia for hollow shaft & solid shaft.

  • Strength of Materials

    Increase in stress at the outer fibers if the shaft is made hollow with a 1 1/2 inch bore. d. Stress at the inner fibers of the hollow shaft. e. Angle of twist per foot of hollow shaft. 2.

  • Working Speed in RPM

    A transmission shaft is fitted with a coupling that is secured by eight 20 mm diameter bolts pitched on a circle with a diameter of 225 mm. The bolt material has an ultimate shear stress of 280 MN/m2 and a factor of safety of 4.0 is to be used.

  • Design Engineering (Maximum Power Transmitted; Maximum Torsional Shear Stress; Greatest Twist in Degrees)

    Find the maximum torsional shear stress in a 75 mm diameter shaft transmitting 40 KW power at 1.33 r/s if the maximum twisting moment exceeds the minimum by 40 per cent. What is the greatest twist in degrees per metre length if G =87 GPa?

  • Largest Allowable Square Cross Section

    Problem 160671 Consider the square shaft 6 metres long with each side being B cms.

  • Maximum horizontal shear and bending stress

    This solution determines the magnitude and location of maximum horizontal shear stress and the maximum bending while neglecting the shaft weight.

  • maximum allowable stress

    Hence determine the shear stress in the pulley shaft. given that it is in double shear Task 4 For the pulley arrangment in Task 3, determine the maximum tension T allowable in the cable, if the shear stress in the pulley shaft is to be kept to 100

  • Calculating shear stress and angle of twist

    Explains how to calculate the maximum shear stress in each part of the shaft and the angle of twist for given example.

View More Related Solutions