Purchase Solution

Transmission schemes and Time sequence diagrams

Not what you're looking for?

Ask Custom Question

. Calculate the overhead associated with the following transmission schemes:
a. Asynchronous transmission; 8 data bits, 1 start bit, 1 stop bit
b. Asynchronous transmission; 7 data bits, 1 start bit, 1 stop bit
c. Asynchronous transmission; 7 data bits, 2 start bits, 1 stop bit, 4 bit FCS
d. Synchronous transmission; 1000 bit data field, 8 bit preamble and 8 bit post amble
e. Synchronous transmission; 2000 bit data field, 8 bit preamble and 24 bit post amble.

8. Show a time sequence diagram for the following scenarios:

a. Stop-and-wait ARQ, frames 0,1, and 2 are transmitted successfully and frame 3 is in error and a successful resend of frame 3 occurs.
b. Go-back-N ARQ, frames 0,1,2 and 3 are sent. Frames 0,1, and 3 are received error free. Frame 2 is in error. Show the subsequent error correction.

Attachments
Purchase this Solution
Solution Summary

The solution examines transmission schemes and time sequence diagrams. The stop-and-wait ARQ frames are provided.

Solution Preview

3.
Let us assume that 1000 bytes are required to be send at a transmission channel having speed of 100 bps.then the over head in the terms of time and bits can be calculated in the following manner.

a)Asynchronous transmission; 8 data bits, 1 start bit, 1 stop bit

(i) each bit we have overhead of 2bits.

(ii)now total overhead in bits= 1000 * 2=2000 bits
overhead in time=2000/100= 20 ...

Purchase this Solution
Free BrainMass Quizzes
Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

Air Pollution Control - Environmental Science

Working principle of ESP

View More Free Quizzes
Related BrainMass Solutions

  • Compare wireless modulation schemes used in IEEE wireless LA

    One of the wireless modulation schemes is the direct sequence spread spectrum or DSSS. In DSSS, expanded redundant code are being added to each bit before transmission.

  • Time Sequence diagrams

    236996 Time Sequence diagrams Please reference this figure for the question: 55. Draw 3 time sequence diagrams that illustrate the flow of frames between points B and G in Figure 1 using the following information: a.

  • Telecommunications and Networking

    Protocols also determine the error detection and correction schemes to be used by computers in situations where in the signals are erroneous due to transmission problems or high-loss transmission medium.

  • Multimedia networking -

    The attached image fig6.24, The sequence of departed packet is: 1, 3, 2, 4, and 5. What would be the sequence if preemptive priority queuing is used instead?

  • Manchester diagrams

    Mbps transmission using a 4b/5b MLT code.

  • Analysis of TDMA satellite transmission system

    What is the duration of the burst transmission from each earth station? d. How much time is there in the TDMA frame that is not used for data transmission? e.

  • Preemptive Priority Queuing

    133632 Preemptive Priority Queuing In the enclosed figure, the sequence of departed packet is: 1, 3, 2, 4, and 5. What will be the sequence if preemptive priority queuing is used instead?

  • Database Concepts

    UML already has the capability to model the most relevant real-time systems features, such as performance (using tagged attributes), resources (using Component or Deployment Diagrams) and time (using classifiers and tagged attributes).

  • Nyquist Bandwidth

    Thus 8-PSK is often omitted from standards and, as seen above, schemes tend to 'jump' from QPSK to 16-QAM (8-QAM is possible but difficult to implement).

View More Related Solutions